Gigaset C620 S30852-H4203-D201 Manual De Usuario
Los códigos de productos
S30852-H4203-D201
32
da en fi no sv
Gigaset C620 / LUG IM-Nord en / A31008-M2403-R201-1-SM19 / settings.fm / 4/25/13
Te
mplat
e
B
o
rn
eo
, V
e
rs
ion 1
, 21.
06
.2
012
ECO DECT
ECO DECT
ECO DECT uses less energy and reduces transmission power.
Reducing transmission power (radiation)
In normal operation (default setting):
The device range is set to maximum as default. This guarantees optimum wireless management.
In idle status, the handset will not function (as it is not transmitting). Only the base will maintain
contact with the handset via a low wireless signal. During a call, the transmission power
automatically adapts to the distance between the base and handset. A closer distance to the
base means lower transmission power.
In idle status, the handset will not function (as it is not transmitting). Only the base will maintain
contact with the handset via a low wireless signal. During a call, the transmission power
automatically adapts to the distance between the base and handset. A closer distance to the
base means lower transmission power.
You can reduce the transmission power even further:
1) Reducing the range and thereby lowering transmission power by up
to 80%
to 80%
In many spaces such as apartments, business rooms and offices, the maximum range is not
necessary. If you deactivate the Maximum Range setting, you can reduce the transmission
power during a call by up to 80%, using half of the range.
v
necessary. If you deactivate the Maximum Range setting, you can reduce the transmission
power during a call by up to 80%, using half of the range.
v
¤
Ï
¤
OK
¤
q ECO DECT
¤
OK
¤
Maximum Range
¤
Change (
³
= activated)
Display icon for reduced range
This setting cannot be used with a repeater (
2) Deactivating DECT wireless module in idle status (Eco Mode+)
With the No Radiation setting, you can deactivate the transmission power of the base
completely during idle status.
v
completely during idle status.
v
¤
Ï
¤
OK
¤
q ECO DECT
¤
OK
¤
q No Radiation
¤
Change (
³
= activated)
When the wireless model is deactivated, the icon
¼ is displayed in idle status instead of the
signal strength icon.
This setting cannot be used with a repeater (