Black Box LGC5950C-R2 Manual De Usuario

®

  13 of 13

11/1/2010 

#24435

Layer 2 managed modules and media converters

Managed High-Density Media Converter System II Modules

 work 

with all 

High-Density Media Converter System II

 chassis. Because 

management features are built into the module, not the chassis,  
the modules are fully manageable even if installed in an unmanaged 
chassis.

Multiport Managed Media Converters

 work as remote units with 

the chassis-based modules. Use the fiber port to extend your network, 
use the three or four 10-/100-Mbps copper ports to add Ethernet 
links at the remote site.  

Managed High-Density Media Converter System II Modules

 work 

together with 

Multiport Managed Media Converters

 to create an ideal 

“last-mile” solution, bringing bandwidth-managed secure content to 
users up to 100 kilometers (62 miles) away. This combination is also 
an ideal solution for ISPs or multitenant building owners who need to 
provide secure connections to several individual users.
Management

Both the modules and the standalone media converters include  

a comprehensive range of management options that enables carrier-
grade delivery of transparent network services with tight security  
and full control of network traffic. The converters are fully SNMP 
manageable for integration into your managed network and include 
VLAN tagging.

Managed High-Density Media Converter System II Modules

  (1) 10-/100-Mbps Copper to (1) 100-Mbps Duplex Fiber

    Multimode, 1300-nm, 2 km

      ST 

      SC 

    Single-Mode, 1310-nm, 40 km 

      ST 

      SC 

    Single-Mode, 1310-nm, 80 km

      ST 

      SC 

    Single-Mode, 1550-nm, 100 km

      SC 

  (1) 10-/100-Mbps Copper to (1) 100-Mbps Single-Strand Fiber  

    Single-Mode, 20 km

      1310-nm TX/1550-nm RX, SC 

      1550-nm TX/1310-nm RX, SC 

    Single-Mode, 40 km

      1310-nm TX/1550-nm RX, SC 

      1550-nm TX/1310-nm RX, SC 

    Single-Mode, 60 km

      1310-nm TX/1550-nm RX, SC 

      1550-nm TX/1310-nm RX, SC 

  With SFP Interface

    (1) 10-/100-Mbps Copper to (1) 155-Mbps SFP Slot 

       

    (1) 155-Mbps SFP Slot to (1) 155-Mbps SFP Slot 

         

Multiport Managed Media Converters

  (4) 10-/100-Mbps Copper to (1) 100-Mbps Duplex Fiber

    Multimode, 1300-nm, 2 km

      ST 

      SC 

    Single-Mode, 1310-nm, 40 km

      ST 

      SC 

    Single-Mode, 1310-nm, 80 km

      ST 

      SC  

    Single-Mode, 1550-nm, 100 km

      SC 

   (4) 10-/100-Mbps Copper to (1) 100-Mbps Single-Strand Fiber  

  (Order one of each.)

    Single-Mode, 20 km

      1310-nm TX/1550-nm RX, SC 

      1550-nm TX/1310-nm RX, SC 

    Single-Mode, 40 km

      1310-nm TX/1550-nm RX, SC 

      1550-nm TX/1310-nm RX, SC 

Altitude — 0 to 10,000 ft. (0 to 3048 m)

Distance (Maximum) — Downlinks: 100 m (328 ft.); 

Uplink: LH1310A, LH1410A: 100 m; 

  LH1311A–LH1312A, LH1411A–LH1412A: 2 km (1.2 mi.); 

  LH1313A–LH1314A, LH1319A– LH1320A, LH1413A–LH1414A,  

    LH1420A– LH1421A: 40 km (24.9 mi.); 

  LH1315A–LH1316A, LH1415A–LH1416A: 80 km (49.7 mi.); 

  LH1317A–LH1318A, LH1418A–LH1419A: 20 km (12.4 mi.); 

  LH1321A–LH1321A: 60 km (37.3 mi.); 

  LH1417A: 100 km (62.1 mi.)

Enclosure — Steel

Forwarding — 10 Mbps: 14,880 pps;  

100 Mbps: 148,800 pps

Management — In-band via included iView software; 

SNMP v1 and v2c compatible; Support for Telnet

™

 

Operation — Half- or full-duplex

Standards — IEEE 802.3i, IEEE 802.3u, IEEE 802.1p, IEEE 802.1Q

CE Approval — Yes

Environmental — Storage Temperature: -13 to +158° F (-25 to +70° C); 

Operating Temperature: +32 to +122° F (0 to +50° C); 

Humidity: 5 –90%, noncondensing

Power — 100–240 VAC, 50–60 Hz external power supply

Size — 3-Port models: 0.9"H x 3.5"W x 4.4"D (1 x 8.9 x 11.2 cm); 

4-Port models: 1.5"H x 4.75"W x 7.2"D (3.2 x 12.1 x 18.4 cm)

Weight — 3-port models: 1.1 lb. (0.5 kg); 

4-port models: 1.6 lb. (0.6 kg)