Black Box SP215A-R2 Manual De Usuario
BLACK BOX
®
2 of 4
08/02/2011
#16490
»
Choose how much power protection you need.
»
Available with or without on/off switches.
»
Affordable power strips for wallmount-type
power supplies.
»
Each includes a protective circuit breaker
with a front-panel reset button.
»
Organize those tangled power cords
in your rack.
»
All units are 100% tested before we ship
them to you!
Features
Your expensive rackmount equipment deserves power from
Black Box.
For basic power to multiple devices, choose the 19"
Rackmount
Power Strip
—available in Front-Access Switchable (PS189A),
Rear-Access Switchable (PS186A), or Rear-Access Switchless
(PS188A-R2) models.
(PS188A-R2) models.
The Switchless versions have six rear outlets and are our basic
power strips without surge protection.
The Front-Access model has six outlets rotated 90° for wallmount-
type power supplies. It comes with a lighted on/off switch to control
power to the power strip and does not have surge protection.
power to the power strip and does not have surge protection.
Or choose the 20-amp, 19" 8-outlet rack versions: SP470A-R2
(includes on/off switch) or SP471A-R2 (switchless). And if you need
a 24"
a 24"
Rackmount Power Strip
, order the SP214A-R3 (switchless).
All three models feature a twist-lock plug.
Suppress the Surge
Suppress the Surge
Suppress the surge with our standard 6-outlet
Surge Suppressor
,
the SP187A (switchable).
The actual clamp voltage is 336 volts peak, so it’s well-equipped
to handle most abnormal power surges. It’s EMI/RFI resistance works
up to 40 dB, creating a safe path for high-frequency noise around
your protected circuit. The SP187A features a 15-amp resettable
circuit breaker.
up to 40 dB, creating a safe path for high-frequency noise around
your protected circuit. The SP187A features a 15-amp resettable
circuit breaker.
As a fail-safe measure, the suppressor automatically shuts off
power to your outlets if its surge suppression fails. When the LED
goes dark, you know the power strip has done its job—it has taken
a major surge, sparing the attached devices—and should be replaced.
goes dark, you know the power strip has done its job—it has taken
a major surge, sparing the attached devices—and should be replaced.
Or choose the 8-outlet models with surge suppression. Both
SP472A-R2 and SP473A-R2 include a 20-amp circuit breaker and a
twist-lock plug. SP472A-R2 has an on/off switch, while SP473A-R2
is switchless.
twist-lock plug. SP472A-R2 has an on/off switch, while SP473A-R2
is switchless.
OVERVIEW
Premium Protection
For the best all-around protection, choose the Premium
Rackmount Surge Suppressor
(SP215A-R2). It provides premium
protection for all advanced and critical electronic, network, and
computer applications. The SP215A-R2 helps prevent power surges
from damaging your equipment.
computer applications. The SP215A-R2 helps prevent power surges
from damaging your equipment.
The Premium Protector’s actual clamp voltage is 260 volts
peak, and the device resists EMI/RFI up to 60 dB. The SP215A-R2
is switchless to prevent accidental shutoffs.
is switchless to prevent accidental shutoffs.
The Vertical
Surge Suppressor Strips
are 48", 70", or 77"
rackmountable power strips
that mount from top to bottom in the
rear of standard 19" racks. These strips have 10, 11, or 12 outlets
on the front panel. All models of the Vertical
on the front panel. All models of the Vertical
Surge Suppressor
Strips
feature electrical and mechanical grounding, resist EMI/RFI up to
40 dB, and have an LED indicator and no power switch. All models
also fall into the UL
40 dB, and have an LED indicator and no power switch. All models
also fall into the UL
®
1449 330-volt clamping category (actually clamps
at 312 volts).
NOTE: The SP187A, SP215A-R2, SP197A-R2–SP199A-R2, and
SP216A-R2–SP218A are designed to protect equipment that is sensitive
to the destructive effects of power-line transients and noise on electronic
and electrical circuitry. However, they are not lightning arrestors and do
not protect equipment in the rare instance that lightning actually strikes
your site’s service entrance or antenna.
NOTE: The SP187A, SP215A-R2, SP197A-R2–SP199A-R2, and
SP216A-R2–SP218A are designed to protect equipment that is sensitive
to the destructive effects of power-line transients and noise on electronic
and electrical circuitry. However, they are not lightning arrestors and do
not protect equipment in the rare instance that lightning actually strikes
your site’s service entrance or antenna.
Each unit is 100% tested before it’s shipped to you.
Installation‘s easy for all of our suppressors and power strips.
Installation‘s easy for all of our suppressors and power strips.
With all models, you simply bolt the unit to the cabinet; plug your
devices’ transformers into the unit’s outlets; then plug the unit into
an AC power source.
devices’ transformers into the unit’s outlets; then plug the unit into
an AC power source.