Black Box JPM402A-R2 Manual De Usuario
BLACK BOX
®
2 of 3
4/15/2010
#23678
»
Mount on a wall or in a rack.
»
Choose from open or lock-style cabinets,
or fiber panels or a shelf.
»
Adapter panels (ordered separately) provide
ST, SC, MT-RJ, or LC connectors. Mix and match
panels to suit your application.
panels to suit your application.
»
18-port shelf accepts three adapter panels.
Features
Whether you’re adding a mid-sized fiber workgroup, or
installing or organizing a larger fiber network, Black Box has
the equipment you need. Choose from open or locked
installing or organizing a larger fiber network, Black Box has
the equipment you need. Choose from open or locked
Fiber
Wall Cabinets, loaded Rackmount Fiber Panels, or the Rack-
mount Fiber Shelf
mount Fiber Shelf
. Handy adapter panels feature ST
®
, SC,
MT-RJ, or LC connectors for installing in the Rackmount
Cabinets or Fiber Panels.
Select from two open
Fiber Wall Cabinet
models. They accept
two or four adapter panels. Or choose lock-style cabinets. They
hold four or twelve adapter panels.
Order a loaded
hold four or twelve adapter panels.
Order a loaded
fiber panel
with simplex ST connectors, duplex
SC, or duplex LC connectors. Each panel fits in 1U of rack space
and can be mounted in 19" and 23" racks.
and can be mounted in 19" and 23" racks.
OVERVIEW
Or select the Rackmount
Fiber Shelf
. It accepts 3 adapter panels,
which have 6 connectors each, for a total of 18 connectors per
Rackmount
Rackmount
Fiber Shelf
.
The cabinets, panels, and shelf are constructed of high-quality,
16-gauge cold-rolled steel (CRS) and are finished with a black
electrostatically applied powder coat.
Our High-Density (HD) Adapter Panels are equipped with a
variety of adapter connector types and snap easily into
16-gauge cold-rolled steel (CRS) and are finished with a black
electrostatically applied powder coat.
Our High-Density (HD) Adapter Panels are equipped with a
variety of adapter connector types and snap easily into
Fiber
Wall Cabinets
. We offer ST, SC, ST to SC, MT-RJ, or LC connectors.
The adapters work with both multimode fiber and non-angle
polish single-mode fiber, and they’re constructed with high-
retention phosphor bronze alignment sleeves.
We also offer an unloaded adapter panel for four snap fittings
or keystone jacks.
polish single-mode fiber, and they’re constructed with high-
retention phosphor bronze alignment sleeves.
We also offer an unloaded adapter panel for four snap fittings
or keystone jacks.
Each side of the cabinet has
a large access opening for
routing cables horizontally.
To access the cabinet from the rear, just
fold open the back door. Thumbscrews
hold it in place.
The cabinet comes with front
or center adjustable brackets for
easy mounting in other cabinets
or racks. Use the included 10-32
or 12-24 panhead screws to
mount in a 19" or 23" rack.
The fold-down front door has a
smoked plastic front cover (not
shown) that enables you to view
cable terminations when it’s closed.
Rectangle cable holders
(not shown but included)
also snap into the tray.
Use the interior cable ties
and black spool rings to hold
distribution cable in place.
The spool also provides storage
for excess cable lengths.
Multipair fiber optic cable
terminates in the snap-in
wadapter panels.
Four rubber grommet openings
enable you to route fiber cable
through the top of the enclosure.
Four additional openings are also
provided on the bottom.
2U 6-Adapter Panel Rackmount
Fiber Cabinet (JPM418A-R3)
The inner tray pulls out for easy access
to the adapter panels that you install
in the unloaded enclosure. A screw-lock
safety catch keeps you from pulling
the tray too far out.
JPM401A-R2