Black Box VX-HDMI1X4-POE Manual De Usuario
BLACK BOX
®
724-746-5500 | blackbox.com/go/MIPX
2 |
MediaCento IPX Extenders
MediaCento IPX Multicast
The ideal solution for:
»
Digital signage in different buildings or stores.
»
Distributing high-quality medical imaging video across
a hospital campus.
a hospital campus.
»
Streaming video to classrooms in schools.
»
Multicasting video in command and control room setups.
»
Corporate video sharing and training.
»
Staging and events.
• Transmits HDMI
®
video and audio over an Ethernet
network to a virtually unlimited number of screens.
Can go as far as your network reaches.
Can go as far as your network reaches.
• Uses existing standards-based Ethernet technology
and TCP/IP protocols.
• Can be remotely powered over the Ethernet using
standard 802.3af PoE.
• Provides very high image quality with visually lossless
compression.
• Locking HDMI and power connectors.
• A single transmitter can deliver multimedia to hundreds
• A single transmitter can deliver multimedia to hundreds
of remote displays.
• EDID copy function for optimal PC-to-screen performance.
• Supports serial connections to switch screens on/off.
• Supports serial connections to switch screens on/off.
This IP streaming solution multicasts HDMI video and audio to a nearly
unlimited number of screens on a network. You need one VX-HDMI-POE-MTX
transmitter and one VX-HDMI-POE-MRX receiver for each screen.
transmitter and one VX-HDMI-POE-MRX receiver for each screen.
MediaCento IPX is ideal for distributing digital signage content or other
HD video and audio across an Ethernet network. Because the transmitter
and receivers install directly into your existing LAN infrastructure, integration
is easy. There’s no need to run expensive dedicated links from a back room
to digital signage in lobbies. Transmitters and receivers are PoE powered,
eliminating the need for external power supplies.
and receivers install directly into your existing LAN infrastructure, integration
is easy. There’s no need to run expensive dedicated links from a back room
to digital signage in lobbies. Transmitters and receivers are PoE powered,
eliminating the need for external power supplies.
The extender transmits up to 328 feet (100 m) per link but goes even
longer when additional network switches are added to the mix. You can
even use fiber with media converters to go several miles if needed. Its
signal is completely digital from end to end, so your digital content is never
compromised.
even use fiber with media converters to go several miles if needed. Its
signal is completely digital from end to end, so your digital content is never
compromised.
Lossless compression for HD extension.
Featuring visually lossless compression and ultra-low latency, the
MediaCento IPX units transmit broadcast-quality video and audio and support
Full 1080p resolution no matter what the distance or the number of screens,
as well as all common PC resolutions (XGA, SXGA, UXGA, WSXGA) up to
1920 x 1200 at 60 Hz.
Full 1080p resolution no matter what the distance or the number of screens,
as well as all common PC resolutions (XGA, SXGA, UXGA, WSXGA) up to
1920 x 1200 at 60 Hz.
MediaCento IPX PoE Multicast features IGMP support and packetizes
signals so all your HD source content can be delivered anywhere you want over
Ethernet wiring. It works in point-to-point or point-to-multipoint
configurations. Just plug in as many receivers as you need at your remote
screens.
configurations. Just plug in as many receivers as you need at your remote
screens.
Extremely easy to set up and use.
MediaCento IPX also supports RS-232 for configuration
and control, and for extending bidirectional control signals. Use this serial
link to switch screens on or off.
link to switch screens on or off.
There’s no need to configure any IP settings (although more experienced
users can do that if needed). Simply use rotary switches to set the transmitter
and receivers to the same multicast channel and all IP multicasting settings
are automatically configured; then just connect your source, your display(s),
and a network switch. It’s ready to go!
and receivers to the same multicast channel and all IP multicasting settings
are automatically configured; then just connect your source, your display(s),
and a network switch. It’s ready to go!
For product specifications and ordering information, see the last page.
Diagram Format
Rule Size: 0.013
MediaCento
™
IPX PoE
Multicast Transmitters
(VX-HDMI-POE-MTX)
HDMI Cable
CATx Cable
LAN
Layer 3 Switch with IGMP
Digital Displays
HDMI Cables
CATx Cables
CATx Cables
MediaCento IPX PoE
Multicast Receivers
(VX-HDMI-POE-MRX)
Layer 3 Switch
with IGMP
PC
Digital Signage Player
NOTE: For the best performance, use with a Layer 2 or 3 switch with IGMP support. For details, contact Black Box Tech Support.