LevelOne GSW-2692 Prospecto
ProCon_GSW-2692
one world_one brand_one level_
24 10/100Mbps+ 2G/SFP L2 SNMP Stacking Switch
GSW-2692
Related Products
GSW-2690
24Fast +2G/SFP L2
SNMP Stacking Switch
SNMP Stacking Switch
GSW-1291
The LevelOne GSW-2692 is a 24 Auto-MDI/X 10Base-T/100Base-TX port switch
with 2 ComboG and 2 built-in stacking ports with the capability to connect with
up to 8 stacking units.
with 2 ComboG and 2 built-in stacking ports with the capability to connect with
up to 8 stacking units.
High Performance
This switch is loaded with special network features such as VLANs, GVRP and
IGMP making it easy to configure and manage the network environment it
supports. It is a cost-effective solution for medium to large networks that is
looking for a reliable and flexible network connection.
This switch provides high performance architecture with 12Gbps total capacity.
The GVRP feature allows for automatic configuration of VLAN and IGM
snooping identifying multi-cast traffic to make efficient use of the switch’s
bandwidth.
This switch is loaded with special network features such as VLANs, GVRP and
IGMP making it easy to configure and manage the network environment it
supports. It is a cost-effective solution for medium to large networks that is
looking for a reliable and flexible network connection.
This switch provides high performance architecture with 12Gbps total capacity.
The GVRP feature allows for automatic configuration of VLAN and IGM
snooping identifying multi-cast traffic to make efficient use of the switch’s
bandwidth.
Advanced stacking
The GSW-2692 allows for up to 8 stackable switches to be connected via 2
Gigabit stacking ports to create a virtual management switch.
The GSW-2692 allows for up to 8 stackable switches to be connected via 2
Gigabit stacking ports to create a virtual management switch.
Flexible Uplink SFP ports
The 2 SFP ports give network managers the flexibility they need with upgrading
network requirements when connecting single mode and multi mode gigabit
fiber optic cables to the switch.
The 2 SFP ports give network managers the flexibility they need with upgrading
network requirements when connecting single mode and multi mode gigabit
fiber optic cables to the switch.
Security and Redundancy
The port-based MAC filtering prevents unauthorized users to access the switch
while the spanning tree protocol supports a loop-free network that improves
fault tolerance and simplifies network configuration.
The port-based MAC filtering prevents unauthorized users to access the switch
while the spanning tree protocol supports a loop-free network that improves
fault tolerance and simplifies network configuration.
Comprehensive Manageability
The GSW-2692 can both be managed and monitored via SNMP/RMON
protocol with a computer that uses network management software or via an
Internet Web browser. The comprehensive LED indicators assist network
managers in monitoring the switch as well as the traffic flowing through it at one
glance at the LED panel located on the front of the switch.
The GSW-2692 can both be managed and monitored via SNMP/RMON
protocol with a computer that uses network management software or via an
Internet Web browser. The comprehensive LED indicators assist network
managers in monitoring the switch as well as the traffic flowing through it at one
glance at the LED panel located on the front of the switch.
12G L2 SNMP POE
Stacking Switch
Stacking Switch
Key Features
24-Port 10/100 Mbps copper ports and 2 Gigabit/2
SFP embedded
SFP embedded
Gigabit (copper/SFP) ports are compliant with
IEEE802.3z and 802.3ab
IEEE802.3z and 802.3ab
Supports stack of up to 8 units of GSW-2692
MAC-based trunking with automatic link fail-over
Supports 802.3x flow control/backpressure
Non-Blocking full wire speed architecture
Web-based management provides easily configuration
via any web browser
via any web browser
Supports Port-based VLAN and IEEE802.1Q VLAN
Supports 802.3ad port trunking with LACP
Supports 802.1p Class of Service with 4-level priority
queuing
queuing
“At-a-glance” LEDs for port and system status monitoring
19”, 1U rack-mountable size