Philips B5 B5/12 Manual De Usuario
Los códigos de productos
B5/12
13
English
EN
Apply factory settings
You can reset this product to the default settings
programmed at the factory.
1
In AUX mode, on the remote control press
Volume-, BASS -, and TREBLE - in sequence
within three seconds.
»
When the factory settings restore is
complete, the product automatically
switches off and restarts.
6 Update software
To get the best features and support, update your
product with the latest software.
What you need
What you need
•
A USB flash drive that is FAT-formatted. Do not
use a USB hard drive.
•
A computer with Internet access.
•
An archive utility that supports the ZIP file format.
Check software version
In HDMI ARC source, on the remote control press
TREBLE -, BASS -, and Volume- in sequence within
three seconds.
»
The software version number is displayed on the
display panel.
Update software via USB
1
Check the latest software version on
www.philips.com/support.
•
Search for your model and click on
"Software and drivers".
2
Download the software into a USB flash drive.
a
a
Unzip the download if zipped, and make sure
that the unzipped folder is named "UPG".
b
Put the "UPG" folder in the root directory.
3
Connect the USB flash drive to the
(SERVICE) connector on this product.
4
Switch this product to HDMI ARC source (press
HDMI ARC).
5
On the remote control, within 6 seconds press
twice then Volume + once, and then hold
down MOVIE.
»
Then "UPG" (upgrade) is displayed on the
display panel.
6
Wait until the upgrade is completed.
»
If the upgrade is complete, this product
automatically turns off and on again.
Caution
•
Do not turn off the power or remove the USB flash
drive when the software update is in progress because
you might damage this product.
•
The upgrade time may take around eight minutes.
7 Wall mount your
SoundBar
safety precautions. (see 'Safety' on page 2)
Wall mount
Note
•
You must detach the portable speakers from the main
unit before wall mounting or un-mounting.
•
Improper wall mounting may result in accident, injury or
damage. If you have any query, contact Consumer Care
in your country.
•
Secure the wall mount to a wall that can support the
combined weight of the product and the wall mount.
•
Before wall mount, you need not remove the four
rubber feet at the bottom of the soundbar, otherwise
the rubber feet cannot be fixed back.
Screw length/diameter
Depend on the type of wall mounting this wall mount
bracket, make sure that you use screws of a suitable
length and diameter.
See the illustration on the separate wall mount sheet
on how to wall mount the SoundBar.
1) Drill holes on the wall.
2) Secure the wall bracket on the wall with the
dowels and screws.
3) Hang the SoundBar on the wall bracket.
> 25mm
3 - 3.5mm
B5_12_UM_V2.0.indb 13
9/23/2014 1:26:48 PM