UTAX P-4530DN 4434500000 Manual De Usuario

2-5

Preparation before Use 

Press [OK]. The DHCP setting is set and the IPv4 Setting menu 
reappears.

If DHCP is set to Off, enter the IP Address manually.

Press  or  to select IP Address.

Press [OK]. The IP Address screen appears.

Use the numeric keys or  or  to set the IP address.

You can set any value between 000 and 255.
Increase or reduce the figures by pressing  or .
Use  and  to move the position being entered, which is shown 
highlighted.

Press [OK]. The IP address is stored and the IPv4 Setting menu 
reappears.

When DHCP is set to Off, enter the Subnet Mask manually.

Press  or  to select Subnet Mask.

Press [OK]. The Subnet Mask screen appears.

Use the numeric keys or  or  to set the subnet mask.

You can set any value between 000 and 255.
The method for entering is the same as for the IP Address.

Press [OK]. The subnet mask setting is stored and the IPv4 
Setting menu reappears.

DHCP becomes effective when On is selected. Press 

[Menu] to end the mode selection menu.

When Off is set, continue on to enter the IP Address.

IPv4 Setting:

a 

 

b 

********************-
2  Auto-IP
3  IP Address

[ Exit 

  ]

1  DHCP

IP Address:

a 

 

b 

  /**0.  0.  0.  0
    

 

IPv4 Setting:

a 

 

b 

1  DHCP
2  Auto-IP
********************-

[ Exit 

  ]

3  IP Address

Subnet Mask:

a 

 

b 

  /**0.  0.  0.  0
    

 

IPv4 Setting:

a 

 

b 

********************-
5  Default Gateway
6  Bonjour

[ Exit 

  ]

4  Subnet Mask