UTAX P-4530DN 4434500000 Manual De Usuario

A-9

Appendix 

The printer is equipped with a slot for an SDHC memory card with a maximum size of 32 GB, and an SD memory card with 
a maximum size of 2 GB. An SD/SDHC memory card is useful for storing fonts, macros, and overlays.

This enables high-speed printing of multiple copies using an electric sort function. Also, you can use the Job Box functions. 
For details, refer to Job Box on page 5-24.

Once inserted in the printer’s slot, the contents of the SD/SDHC memory card can be read from the operation panel or 
automatically when you power on or reset the printer.

To use an unused SD/SDHC memory card, you must first use the printer to format the SD/SDHC memory card.

Switch off the printer, remove the power cord and then remove the 
main controller unit. To read how to remove the main controller unit, 
refer to the section on inserting the memory module.

Insert the SD/SDHC memory card into the SD/SDHC memory card 
slot.

Attach the main controller unit to the printer in the reverse procedure 
to when it was removed.

Format the SD/SDHC memory card from the operation panel. For the 
procedure for formatting, refer to Format SD Card (Formatting the 
SD/SDHC memory card) on page 4-83.

The optional paper feeder PF-320 will each hold approximately 500 
sheets of paper. Up to 4 optional feeders can be added to the bottom of 
the printer, allowing continuous feeding of up to 2,500 sheets of paper 
when combined with the printer's own cassette. 

IMPORTANT  When you use the paper feeder, place the papers print-
side down.

The papers that can be used in the cassettes supplied with the paper 
feeders are as follows:

Paper size : Envelope Monarch, Envelope #10, Envelope #9, Envelope 

#6, Envelope DL, Envelope C5, A5, B5, B6, ISO B5, A4, 
Executive, Letter, Legal, OufukuHagaki, Oficio II, 
Statement, Folio, Youkei 2, Youkei 4, 216 × 340 mm, 16K 
and Other (92 × 162 mm to 216 × 356 mm)

SD/SDHC 
Memory 
Card Slot