UTAX P-4530DN 4434500000 Manual De Usuario

Appendix 

A-18

The following types of special paper can be used:

Use paper that is sold specifically for use with copiers or printers (heat-fusing type). When using transparencies, labels, thin 
paper, postcards, or thick paper, feed the paper from the MP tray. For details, refer to Cassette (1 to 5) Type (Setting the 
cassette paper type) on page 4-32. 

Since the composition and quality of special paper vary considerably, special paper is more likely than white bond paper to 
give trouble during printing. No liability will be assumed if moisture and so forth given off during printing on special paper 
causes harm to the machine or operator.

Transparencies must be able to withstand the heat of fusing during the printing process. The recommended transparency 
product is 3M CG3700 (Letter, A4).

The table below lists the specifications for transparency:

Overhead projector transparencies

Transparency

Rough paper

Rough

Thin paper (60 to 64 g/m²)

Vellum

Label

Labels

Recycled paper

Recycled

Preprinted paper

Preprinted

Bond paper

Bond

Postcards

Cardstock

Colored paper

Color

Prepunched paper

Prepunched

Letterhead

Letterhead

Envelopes

Envelope

Thick paper (120 to 220 g/m²)

Thick

High-quality paper

High Quality

Custom

Custom 1~8

Before purchasing any type of special paper, test a sample on the machine and check that printing quality is 

satisfactory.

Tolerance of heat

Must tolerate at least 190 °C (374 °F)

Thickness

0.100 to 0.110 mm (3.9 to 4.3 mils)

Material

Polyester

Dimensional accuracy

±0.7 mm (±0.0276 inches)

Squareness of corners

90° ±0.2°