Philips 42PFT6509 42PFT6509/79 Manual De Usuario
Los códigos de productos
42PFT6509/79
11
Timers and clock
11.1
Sleeptimer
With the sleep timer, you can set the TV to switch to standby
automatically after a preset time.
automatically after a preset time.
To set the sleep timer . . .
1 - Press
and select Setup and press OK.
2 - Select
TV settings > General settings > Sleep timer.
With the slider bar you can set the time to up to 180 minutes in
increments of 5 minutes. If set to
increments of 5 minutes. If set to
0 mins, the sleep timer is
switched off. You can always switch off your TV earlier or reset
the time during the countdown.
3 - Press
the time during the countdown.
3 - Press
, repeatedly if necessary, to close the menu.
11.2
Clock
To know what time it is, press
TV GUIDE to find the time in
the TV guide.
In some countries, digital broadcasts do not send UTC -
Coordinated Universal Time information. The daylight saving
change might be ignored and the TV might show an incorrect
time.
Coordinated Universal Time information. The daylight saving
change might be ignored and the TV might show an incorrect
time.
Correct the TV clock
1 - Press
and select Setup and press OK.
2 - Select
TV settings > General settings > Clock > Auto
clock mode and select Country dependent.
3 - Select
3 - Select
Daylight saving and select the appropriate setting.
4 - Press
, repeatedly if necessary, to close the menu.
Set the TV clock manually
1 - Press
and select Setup and press OK.
2 - Select
TV settings > General settings > Clock > Auto
clock mode and select Manual.
3 - Select
3 - Select
Date and Time to adjust.
4 - Press
, repeatedly if necessary, to close the menu.
Change the time zone
In countries with clock transmission data, you can change the
time zone.
time zone.
Step 1 - Select the correct country.
1 - Press
and select Setup and press OK.
2 - Select
Search for channels > Re-install channels and
press
OK.
3 - Select
Australia or New Zealand and press OK.
Step 2 - Set the time zone.
1 - Press
and select Setup and press OK.
2 - Select
TV settings > General settings > Clock > Auto
clock mode and select Automatic or Country dependent.
3 - Press
3 - Press
to go back to the Clock menu and select Time
zone.
4 - Select your time zone, then press
4 - Select your time zone, then press
OK.
11.3
Switch off timer
If you do not press a key on the remote control after a preset
time, or if the TV receives no input signal nor remote control
commands for 10 minutes, the TV switches off automatically to
save energy.
time, or if the TV receives no input signal nor remote control
commands for 10 minutes, the TV switches off automatically to
save energy.
If you use the TV as a monitor or use a digital receiver to watch
TV (a Set-top box - STB) and you do not use the remote
control of the TV, you should deactivate the automatic switch
off.
TV (a Set-top box - STB) and you do not use the remote
control of the TV, you should deactivate the automatic switch
off.
To deactivate the
Switch off timer . . .
1 - Press
and select Setup and press OK.
2 - Select
TV settings > General settings > Switch off timer
and set the slider bar to
Off.
3 - Press
, repeatedly if necessary, to close the menu.
For more information on environmentally friendly TV settings,
press
press
Keywords and look up Eco settings.
34