Tandberg Data StorageLoader 2U LTO, 1 x 10 LTO-3 052102 Manual De Usuario
Los códigos de productos
052102
A
PRIL
2007
S
TORAGE
L
OADER
2U LTO
229
T
APE
A
LERT
F
LAGS
R
EQUIREMENTS
The WORM feature requires the following:
LTO-3 generation of tape drive—the WORM feature is not available on
earlier generations of LTO tape drives (LTO-2 or LTO-1)
WORM-capable drive firmware release 54xx or higher
Special WORM tape cartridges
You can use LTOTool to determine the firmware level currently in your tape
drive(s). Refer to the readme file provided with the program for installation
instructions. Refer to the program’s online help for instructions on
determining the tape drive(s) firmware level.
If your tape drive has an earlier version of firmware, you can download the
updated firmware by visiting the download page on the Tandberg Data
Corporation web site at
.
Note:
for instructions on upgrading tape drive firmware.
T
APE
A
LERT
F
LAGS
shows the new TapeAlert flags associated with the WORM cartridge.
Table C-2 TapeAlert flags associated with the WORM media
Parameter Code
Description
Set
Clear Type
In Hex
In Decimal
3Bh
59
(WORM Medium – Integrity Check Failed)
Set when
the tape drive determines that the data on tape is
suspect from a WORM point of view.
L
Critical
3Ch
60
(WORM Medium – Overwrite Attempted)
Set when
the tape drive rejects a Write operation because the
rules for allowing WORM writes have not been met.
E
Critical