Zibro SM 33 Duo SM3325 Prospecto
Los códigos de productos
SM3325
SM 33 DUO
AIR CONDITIONER
Features
Flexible matching of multiple indoor units with only 1 outdoor unit: This air conditioning set can be
operated with one up to two indoor units on one outdoor unit. Saving the investment for an eventual second outdoor
unit when a consumer needs two indoor units. The indoor units can run independently from each other. It is not
possible that one (or more) indoor unit is heating and other indoor unit is cooling. Heating is leading.
Cooling + dehumidifying + heating (heat pump): The air conditioning is a complete air treatment system. It
Cooling + dehumidifying + heating (heat pump): The air conditioning is a complete air treatment system. It
can cool, dehumidify and heat the air.
Air conditioning: In COOLING mode the unit produces a pleasant and refreshing cool airflow.
Heating: In HEATING mode the unit produces a warm and comfortable airflow. Also the free of charge energy from
Air conditioning: In COOLING mode the unit produces a pleasant and refreshing cool airflow.
Heating: In HEATING mode the unit produces a warm and comfortable airflow. Also the free of charge energy from
the outdoor air is used to increase the efficiency of the system.
Dehumidifying: In DRY mode the unit dehumidifies the air in the room as efficient as possible. Note: In COOLING
Dehumidifying: In DRY mode the unit dehumidifies the air in the room as efficient as possible. Note: In COOLING
mode the air is also dehumidified.
Inverter technology: maximum comfort: The Zibro DC Inverter Wall Mounted Split air conditioner continuously
adjusts the cooling and heating capacity according the desired room temperature. When the desired temperature is
reached, the compressor speed is gradually decreased to maintain the room temperature with a minimum of
variation. By varying gradually the compressor capacity, the expected lifetime as well as the experienced comfort
level will increase. Looking at the experienced comfort level for the user of the inverter system: Non-inverter air
conditioners, which operate at a constant speed, must turn on/off the compressor to control the room temperature
causing less comfortable temperature fluctuations.
Inverter technology: minimum energy consumption: The compressor starts to slow down as the room
temperature reaches the desired temperature. As a result, the over all power consumption is reduced significantly
(up to 35% less than non inverter/ conventional types).
EXTRA: frost protection in outdoor unit: The outdoor unit is provided with a PTC heating cable. When the
system is working as a heater in the wintertime the PTC heating cable will keep the drip pan in the outdoor unit
clear of ice, making sure the condensate water can reach the drain point. Furthermore also the compressor
crankcase is provided with a heating cable. Ensuring the unit can perform and start up at extreme wheather
conditions.
EXTRA: anti-corrosion treatment in outdoor unit: The Zibro Golden Fin corrosion treatment on the outdoor
condenser heat exchanger improves the heating efficiency and accelerates the defrosting process. The unique anti
corrosive Golden Fin coating can withstand salty air and rain in a superb way resulting in a longer expected lifetime
of the condenser.
EXTRA: Home Freezing prevention Button: Upon pressing this button the unit will go into the freezing
prevention mode. The unit will overrule the indoor temperature setting and set it to approx 8-10°C. In this way
preventing your home from freezing during cold periods at the lowest possible energy consumption. When this mode
is selected the indoor unit display will show “FP”. This button can only be operated in heating mode.
Automatic low sound mode: This air conditioner is equipped with a special automatic low sound mode which will
be automatically activated when the room temperature has reached the desired set point temperature. In this
automatic mode the air conditioner will operate on a whispering quiet level.
Turbo mode: With the Turbo mode the air conditioner will reach the preset temperature in the shortest possible
time.
3-layer air filter: The air conditioner is equipped with a 3 layer filter package to clean the circulated room air. The
3M™ HAF air filter delivered together with this unit captures allergens like bacteria, dust and pollen from the
circulated air with an efficiency up to 80%. Pollen are well known as an important stimulus for hay-fever allergy. The
active carbon filter removes unpleasant odours from the air and the screen filter captures large dust particles. The
screen filter can be cleaned with a vacuum cleaner and/or lukewarm water. Per season 2 to 3, 3M™ HAF and active
carbon filters will be used. These filters are available in a consumer package (including 1 3M™ HAF and 1 active
carbon filter).
Remote control with LCD screen: The unit can be operated with an easy to handle remote control including LCD-
display. Using the remote control the air conditioner can be operated up to a distance of approx. 8 metres.
Remote control holder: The remote control can be placed in the wall mounted remote control holder which is
delivered together with the unit.
Adjustable airflow: The up-down airflow can be automatically changed by using the SWING mode. The left-right
airflow can be changed manually.
Sleep Mode: This function enables the air conditioner to increase (cooling) or decrease (heating) automatically 1°C
per hour for the first two hours and then maintain the same temperature for five hours after which the air
conditioner will stop operating automatically. It maintains the most comfortable temperature and saves energy at
the same time.
Fan speed setting: Select with FAN speed button: Automatic, Low, Medium or High. The LCD display on the remote
control will show the chosen speed.
Automatic operation: The air conditioning system can be set to automatic operation for the most suitable MODE:
Cooling, Dehumidifying or Heating, monitoring the indoor temperature.
Auto restart function: If there is any power failure during operation, the operation status before power failure is
memorised and the unit starts operating automatically after power recovery.
Timer: Use TIMER or set a working time between 30 minutes and 24 hours. The preset time appears in the display
of the remote control. The unit switches ON or OFF automatically when this time is passed.
Standby mode: This energy saving feature enables the unit to stay in standby mode (only 1 W energy
consumption).
Full colour box: The unit is delivered completely with all auxiliary parts in a full colour box showing application and
operation information in multiple languages.
Anti-corrosion treatment
Home freezing preven-
tion
3-layer filter
Multi split
Extra frost protection in
outdoor unit
3 functions in 1
Inverter technology
Remote control with
LCD-display