LevelOne IES-0823 IES0823 Prospecto

LevelOne IES-0823 Industry Ethernet Switch provides 6 ports of Gigabit 

Ethernet plus 2 1000Base SFP slots to enable high speed network at 

mission-critical environment. This device is designed to be mounted on 

an industry standard DIN-rail, plus the clearly visible status LEDs provide 

simple monitoring of port link activity. Moreover, the SFP slots support 

pluggable modules that enabling you to choose from a variety of 

transceivers.

All components are built to withstand harsh environment applications 

without compromise where humidity, temperature variation and even 

shock vibration are concerns, including Electric & Utility, Critical 

Infrastructure, Transportation and Surveillance Security. This device 

operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature.

- Provides 6 10/100/1000Base-T ports and 2 SFP ports

- Gigabit combo port can choose to use either 1000BASE-SX/LX/SFP 

   interface or 10/100/1000BASE-TX interface

- Supports 1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, 

   Auto-Negotiation, Auto-MDI/MDIX

- Supports jumbo frame up to 9KB

- Redundant power inputs (12 - 32VDC) with Terminal Block and DC Jack 

   (12VDC)

- Alarms for power failure by relay output

- -20°C to 60°C (-4°F to 140°F) and is tested for functional operation 

   @-30°C to 70°C (-22°F to 158°F).

- Provides DIN-rail or panel mounting 

- Complies with IEC61000-6-2 EMC Generic standard immunity for 

   Industrial environment 

This device has been tested under UL508 standard for Industrial Control 

Equipment to endurance under test turn on and off 6,000 times while 

loaded, with no single failure. It’s highly reliability and safety 

measurement to ensure field hardened, especially for the harsh 

environment.

This unmanaged Industrial Ethernet Switch is designed for the 

demanding industrial environments at businesses in need of instant 

connectivity with no setup or configure required, truly plug and play.

This redundant power system is designed to meet the challenge of 

power failure to ensure reliability and constant availability. Single power 

design works fine in non-critical network applications, but it falls short 

drastically for network applications in transportation, automate 

production or banking.

Rugged IP30 rated aluminium housing is designed for industrial 

applications. With protection against ingress of dirt and solid metal 

housing to ensure a long-last operating life under harsh environments

Unit: mm

Side

Top/Buttom

Back

Front

A

3/

V

2

1

C

D

110

68

13

5