Intel S1400SP4 DBS1400SP4 Manual De Usuario

Los códigos de productos

DBS1400SP4

Advanced Management Feature Support (RMM4)

Intel® Server Board S1400SP TPS

Revision 1.0

Intel order number G64248-001

 The media redirection feature supports multiple encryption algorithms, including RC4 and

AES. The actual algorithm that is used is negotiated with the client based on the client’s
capabilities.

 A remote media session is maintained even when the server is powered-off (in standby

mode). No restart of the remote media session is required during a server reset or power
on/off. An BMC reset (for example, due to an BMC reset after BMC FW update) will require
the session to be re-established

 The mounted device is visible to (and useable by) managed system’s OS and BIOS in both

pre-boot and post-boot states.

 The mounted device shows up in the BIOS boot order and it is possible to change the

BIOS boot order to boot from this remote device.

 It is possible to install an operating system on a bare metal server (no OS present) using

the remotely mounted device. This may also require the use of KVM-r to configure the OS
during install.

 USB storage devices will appear as floppy disks over media redirection. This allows for the

installation of device drivers during OS installation.

If either a virtual IDE or virtual floppy device is remotely attached during system boot, both the
virtual IDE and virtual floppy are presented as bootable devices. It is not possible to present
only a single-mounted device type to the system BIOS.

7.2.1

Availability

The default inactivity timeout is 30 minutes and is not user-configurable. Media redirection
sessions persist across system reset but not across an AC power loss or BMC reset.

7.2.2

Network Port Usage

The KVM and media redirection features use the following ports:

  5120 – CD Redirection
  5123 – FD Redirection
  5124 – CD Redirection (Secure)
  5127 – FD Redirection (Secure)
  7578 – Video Redirection
  7582 – Video Redirection (Secure)