D-Link DMC-300SC DMC-300SC/A Manual De Usuario
Los códigos de productos
DMC-300SC/A
01
Media Converters & Chassis
Expandable Chassis System
The Chassis-based Media Converter product lineup includes various
independent media converters and a chassis capable of housing up to 16
media converters. You can start with a single media converter, equipped with
its own housing and AC power supply. As your requirements grow, you can
mount a chassis in your equipment rack and install all your media converters in
the chassis. The housing of each media converter can be easily removed, and
the media converter unit can be slid into the chassis.
Management Options
You may configure your chassis with or without management functions. If you
would like to configure it with management functions, a management module
is available for installation in the chassis. This module lets you monitor the
real-time status of all media converters and power supplies in the chassis,
and also sends out alarms to alert you of all abnormal situations. Management
follows industry standards, including SNMP and HTTP, allowing you to monitor
and manage media converters and power supplies from a third-party SNMP
management workstation or via a web browser.
Media Conversion Solutions
The following media converter solutions are available:
- Fast Ethernet twisted-pair to Fast Ethernet 100BASE-FX fiber (single-mode
and multi-mode)
- Fast Ethernet 100BASE-FX fiber multi-mode to single-mode
- 1000BASE-T Gigabit twisted pair to 1000BASE-SX and 1000BASE-LX Gigabit
fiber
For fiber cables, MT-RJ and SC connector types are supported.
Standalone or Chassis Based Installation
The media converters convert signals capable of transmission on one type of
cable to signals capable of transmission on another type of cable. This allows
you to connect longer distance fiber cables between devices that are designed
only for shorter distance cables, such as the Cat. 5 twisted-pair cables.
All media converters in this system come with their own solid metal case
housing, LED status indicators and AC to DC power adapters. They can be
used as stand-alone converters, or installed in the chassis. When installed in
a chassis, you must first remove their metal cases and slide their PC boards
into the chassis slots. The chassis’s power supply will be used instead of the
media converters’ own AC to DC power adapters. All media converters are hot-
swappable when used with the chassis.