Promise Technology Vess J2600sD 16TB F40VJ2S38010000 Prospecto

Los códigos de productos
F40VJ2S38010000
Descargar
Página de 2
¹Additional AA-Mux adapter is required when use with SATA 3G drive, while SATA 6G drive requires BlackJack adapter
© 2012 PROMISE Technology, Inc. All Rights Reserved. PROMISE, the PROMISE logo, VTrak, SmartStor, SuperTrak, FastTrak, VessRAID, Vess, PerfectPATH, PerfectRAID, SATA150, ULTRA133 VTrak S3000, BackTrak, 
HyperCache, HyperCache-R, HyperCache-W, DeltaScan and GreenRAID are registered or pending trademarks of PROMISE Technology, Inc. in the U.S. and other countries. All other trademarks are the property of their 
respective owners. Information regarding products, services and offerings may be superseded by subsequent documents and are subject to change without notice. For the latest information and specifications regard-
ing PROMISE Technology, Inc. and any of its offerings or services, please contact your local PROMISE office or the corporate headquarters. Visit www.promise.com for more information on PROMISE products.  
P/N: G61300000000xxx v1.00 - 2012/12/12
System Models
Vess J2600sS/J2600sD
System and Controller Features
Form Factor
3U
Drive Support
16 Drives (3.5”)
SAS/SATA
1
 (6Gb/s or 3Gb/s), NCQ, TCQ
# Controllers
Single/Dual
Host Connectivity per Ctrl.
Dual, IN/OUT 6G SAS-wide (x4) port over SFF-8088
Host Options
SAS HBA
Follow Vess J2600s compatibility list
RAID Storage Subsystem
Vess R2000 Series
SAS Features
Management Function
Full SAS domain Topology Management
SAS Management Protocol
In-band Access to Expander and PHY
Statistic Counters and Performance Monitors
SES Enclosure Management
SCSI SES Command Set over Virtual SSP Device
System Management
Management Interfaces
LED Status Indicator
In-band SES Enclosure Management; CLI via RJ-11 serial port
Management Protocols
SES over in-band SAS
System Information
AC Input
100 ~ 240 VAC, 60 ~ 50Hz
Current (Maximum)
4A (100V); 2A (240V)
Power Supply
Three redundant 250W (Up to Four) 
90-264V full-ranging w/PFC, Hot swappable N+1 Design
FAN
Hot swappable redundant design with battery backup module
Temperature
5° ~ 40°C (-40° ~ 60°C non operational)
Relative Humidity
10% to 80% non-condensing
Dimensions (H x W x D)
131 x 447 x 507 mm
5.1 x 17.6 x  20 in
Weight
15 kg (33.1 lbs) w/o drives
26.2 kg (57.8 lbs) w/ drives
Warranty and Support
Warranty
3 years limited warranty
Supported Hardware Options
SAS Cable, 3G SATA AA-Mux Adapter, 6G SATA BlackJack Adapter