Voltcraft CM 420 AA AAA Intelligent Battery Charger Station Charge Manager 420 Hoja De Datos

If no rechargeable battery is inserted in the “Charge Manager 420”, the following message
appears:

Pressing the button “>” activates the USB output. The current output is displayed by the
charger as follows:

Press the button “<“ to switch off the output again.

¼

No batteries must be in the charge slots during use of the USB output.

The display “CURRENT=  -.---A” means that no USB device is connected or no
current flows.

After inserting a cell (e.g. in slot 1), the following display appears:

Within the next 5 seconds, the charge program can be selected with the “<“ and “>”
buttons, with the time extending by another 5 seconds with every push of a button. Only
after this period will the settings be assumed.

Briefly pressing “OK” suffices to confirm at once.

If no input is made, the programme “CHARGE” starts automatically at a charge current of
500 mA after approx. 10 seconds.

VOLTCRAFT CM 420
  USB-OUT= OFF

USB-OUT=  ACTIVE
CURRENT=  0.499A

SEL PROG SLOT 1
SET CHARGE