Post In ELEKTRONISCHER POSTMELDER 5050 Manual De Usuario

27

UK

2

3

1

USER MANUAL FOR POST IN WIRELESS MAIL 

ANNOUNCING SYSTEM

Before using your new wireless mail announcing system, we recommend that you carefully read the 
complete user manual.

POST IN wireless mail announcing system consists of
One receiver and one sensor.

Receiver figure A 

 

 

 Sensor figure B

HOW DOES POST IN WORK?

The sensor registers when mail is delivered to your mailbox and sends a signal to the receiver.

Button 

1

 on the receiver flashes when receiving the signal. The button flashes for 0.05 seconds for 

every 1.5 seconds. The flashing signal continues until the receiver is reset by pushing button 

1

.

PRIOR TO FITTING

Activate the receiver and sensor.
The receiver and sensor are delivered with the batteries already in place. You activate them by 
pulling out the clear foil in the direction of the arrows. The receiver and sensor are now ready for 
synchronizing.

1.  Push and hold button 

1

 on the receiver until the light is constant (about 5 seconds)

2.  Activate the sensor by flipping it around its axis (shown as a stippled line, see figure B).
3.  Synchronisation is complete when the button on the receiver is turned off. The unit is ready 

for use after 10 seconds.

Please note: The transmitter must rest completely for 10 seconds between each activation.