Led Lenser SEO 7R 6107-R Manual De Usuario

03

LED LENSER® * SEO 7R

7R glows with lower brightness (Light Function 

Dim). If you at this second turn do not switch 

briefly but keep the switch button pressed 

you can change the brightness infinitely. For 

the time that the switch button is pressed, the 

brightness varies between full and reduced 

brightness. At both ends of the SEO 7R goes off 

shortly, and then again to be lighter or darker(a 

blinking signal happened at both ends). When 

you release the switch button you lock the 

current brightness. This brightness is retained 

for the Light Function Dim even if you turn the 

head lamp off.

After the Light Function Dim (altogether 

3 times fast switching) comes the Light 

Function „Automatic Dim“. A sensor detects 

the brightness of the environment and can 

adjust the brightness of the SEO 7R. If this 

Light Function is activated, the brightness is 

reduced if you e.g. illuminate objects at close 

range. This reduces the risk of glare and 

makes working e.g. at a desk easier. But if you 

illuminate distant objects or the environment 

turns darker, the brightness of the head lamp 

is increased.

The last Light Function that can be used in 

the Light Program White is the Light Function 

Signal (slow even flashing). If the SEO 7R is 

off, you get to it by switching the switch button 

4 times while you do not wait longer than 2 

seconds between each switching.

Additional switching turns SEO 7R off and 

the circle starts again with the Light Function 

Power when you press the switch button again. 

So the Light Functions are in a loop. But please 

note that you turn off the head lamp by every 

switching if since the previous switching more 

than 2 seconds have elapsed. For example in 

case you let pass more than 2 seconds after 

you turned the Light Function „Automatic Dim“ 

on the next switching will not change to head 

lamp to Light Function Dim but will turn the 

SEO 7R off.

If the Lighting Program „Red Night Vision“ is 

enabled (see Point 5), you can use the red light 

of the head lamp.

When the switch button is pressed, when the 

SEO 7R is off, the head lamp glows in the Light 

Function Power at full brightness in red. When 

you switch a second time within 2 seconds, the 

SEO 7R blinks in the Light Function Signal (slow 

even flashing).

The Light Function Signal is the last Light 

Function that can be used in the Light Program 

“Red Night Vision” so additional switching 

turns SEO 7R off and the circle starts again 

with the Light Function Power when you press 

the switch button again. 

So the Light Functions are in a loop. But please 

note that you turn off the head lamp by every 

switching if since the previous switching more 

than 2 seconds have elapsed. For example in 

case you let pass more than 2 seconds after 

you turned the Light Function Power on the 

next switching will not change to head lamp to 

Light Function Signal but will turn the SEO 7R 

off.

By selecting one of the two Energy Modes 

a decision on how the energy contained in the 

accumulator respectively in the batteries is 

used. 

1. Energy Saving: The light output is controlled 

by the integrated Smart Light Technology 

(SLT). The brightness is matched to the real 

conditions that occur during normal use of the 

lamp, thus providing a longer burn time.

2. Constant Current: This Energy Mode allows 

the continuous use of all the Light Functions 

with a more or less constant light output. This 

Energy Mode is to be preferred when a high 

brightness level is more important than a long 

burn time.

Changing of the Energy Modes

For changing the Energy Modes, one of the 

Light Functions in the Light Program White 

has to be activated, e.g. Light Function Signal 

(SEO 7R flashes slowly and evenly). Then you 

switch the switch button and keep it pressed 

for approx. 2 seconds. The SEO 7R turns off 

and turns on after a short moment. Then the 

head lamp turns off suddenly or the brightness 

fades to zero. 

In case the brightness reduces gradually 

to zero, the SEO 7R is in the Energy Mode 

Energy Saving. But if the brightness of the 

SEO 7R remains constant for a moment to 

then suddenly drop to zero, the head lamp 

is thereafter in the Energy Mode Constant 

Current. 

With this procedure, you can switch between 

the two Energy Modes. It is not possible to 

determine in which Energy Mode the SEO 7R 

is. To find this out, you must carry out the 

procedure. If the SEO 7R is thereafter not in 

the desired Energy Mode any more, you must 

repeat the procedure again.

Under Point 5 it has been described how to 

switch between the white and the red LED. 

This takes place when the SEO 7R is off and 

the switch button is pressed only for approx. 

2 seconds. The head lamp will change from 

red to white or from white to red. But when the 

switch is pressed longer (approx. 5 seconds) 

until the light turns off you have enabled the 

„Transport Lock“. Then the SEO 7R can not be 

turned on again but the red LED flashes for a 

short moment to indicated that this function is 

activated in case the switch button is pressed. 

The SEO 7R therefore cannot be switched 

on, either intentionally or unintentionally and 

inadvertently consume energy.

Only when you hold the switch button pressed 

for 5 seconds again this function („Transport 

Lock“) is deactivated again and the lamp is in 

the Light Program White.

If the Accumulator-Pack, the alkaline batteries 

or NiMH-Accumulator are taken out the battery 

box you have "reset" the SEO 7R. You have thus 

reset a few functions:

- The „Transport Lock“ (see Point 7) is 

   deactivated

- The Light Function Dim (see Point 5.1) is set 

   to low brightness

- As Energy Mode Energy Saving is actived (see 

   Point 6).