Brinno ATL045 Hoja De Datos

 

  

   These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1,  

D-92240 Hirschau (www.conrad.com). 

 

 All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfi lming, 
or the capture in electronic data processing systems require the prior written approval by the editor. 
Reprinting, also in part, is prohibited. 

 

 These operating instructions represent the technical status at the time of printing. Changes in         
technology and equipment reserved. 

 

The wide angle lens for the time lapse camera TLC200 enhances your camera's angle and 
view by 0.45x. 
Any use other than that described above is not permitted and can damage the product. 
This product complies with the applicable national and European regulations.
All names of companies and products are the trademarks of the respective owners. All rights 
reserved.

 

•  For safety and approval (CE) reasons, unauthorised conversion and/or modifi ca-

tion of the product are not permitted.

 

•    Do not expose the product to high temperatures, strong vibrations or heavy me-

chanical loads.

 

•   Handle the product with care; it can be damaged by impacts, blows, or accidental 

falls, even from a low height.

 

•  If you have any doubts about the correct operation, or the safety of the product, 

please consult a specialist.

 

•   This product is not a toy and must be kept out of the reach of children. Only use the 

product out of the reach of children. Small parts of the product could be swallowed.

 

•   Condensation may form when the product is brought from a cold room into a warm 

one. Therefore, wait until it has reached room temperature before using it.

 

•  Do not leave packaging materials unattended. It may become a dangerous play-

thing for children.

 

•   Also observe any further safety instructions in the individual sections of this operat-

ing guide.

To install the wide angle lens, proceed as follows:
•   Remove the protective foil on the back of the metal ring provided

                            

•   Clean the lens of the time lapse camera and make sure there is no more dust on the surface 

of the lens 

•   Place the metal ring onto the lens edge and carefully press 

it down 

•   There is a magnet on the wide angle lens. You can now 

attach the wide angle lens to the metal ring on the lens of 
the time lapse camera

•   Fasten the provided rubber ring with string on the lens and con-

nect the strap securely to the housing of the time lapse camera 
TLC200. For this purpose, you will fi nd an opening (small slot) 
on the top of the camera where you can fasten the strap

   The secure attachment of the wide angle lens to the camera has the purpose of 

preventing the lens from falling down and thus avoiding the damage of the wide 
angle lens.  

•   If the wide angle lens is not to be used, you should cover it with the lens protection provided 

to avoid possible scratch marks or dirt residues

 Do not point the camera directly towards the sun or very bright light as this might 
damage the lens.

   After fastening the metal ring to the lens of the time lapse camera TLC200, you 

should not remove it again; otherwise this may lead to damage of the lens.

Wide angle lens
2 metal rings
Protective cover for the lens
Fastening strap
Transport and storage bag

This device is maintenance-free. Only clean the exterior of the device with a soft, dry cloth or 
a brush.
Never use caustic cleaning agents or chemical solutions, as they could damage the surface 
of the casing.

   Dispose of an unserviceable product in accordance with the relevant statutory regu-

lations.

Magnifi cation ........................ 0.45 x
Lens layout ........................... 2 elements in 2 groups
Dimensions ........................... 39 x 24 mm
Weight .................................. 40 g

We, Conrad Electronic, Klaus-Conrad-Straße 1, 92240 Hirschau, hereby declare that this prod-
uct adheres to the fundamental requirements and the other relevant regulations of Directive 
1999/5/EC.

The Declaration of Conformity for this product can be found at www.conrad.com