Doerr Foto Dörr Foto Action Cam 900157 Snap Shot Mini 5.0 900157 Hoja De Datos

User Manual

DÖRR GmbH Fotomarketing • Postfach 1280 • 89202 Neu-Ulm/Germany

Date & Time: Date to be set as dd.mm.yyyy, Time to be set in 24 h

Time Stamp: Choose if time & date are shown on pictures or not

Password: Secure camera with password, to avoid misuse. The password is needed every time the camera is switched “on”. Default password is “0000”. 

Note your password carefully, without the password the camera cannot be operated.

Language: Choose either German or English language

Sound / Beep: Choose “beep” sound on keyboard input or “silent” mode

Overwrite function: Camera may overwrite old pictures with new ones when SD card is full or alternatively abandon function

Format: This function deletes all data on the SD card

 

Default settings: This sets all parameters to “factory defaults” except date & time

Press “ok” in setup mode to watch latest photos. Press ▼ and ▲ to display all pictures. Press “ok” again to return to setup screen. Videos cannot be displayed but their 

data with the first “picture”. Single pictures and videos can be deleted by pressing “menu” in playback mode and confirm with “ok”.

File name: Pictures and videos will be named continuously, starting with IMG0001.jpg (picture) or IMAG0001.avi (video)

Firmware upgrade: Once available, camera may be updated

Test shot: In setup mode press then “ok” to manually take a test shot

Fix camera to a tree, pole or any suitable object. Best range is 3-10 meters from camera to object. For security reasons you may obtain cable lock optionally.

1)  Hang up camera in about 0,75 - 1 m height, slightly tilting ahead

2)  Switch camera to “setup” and close housing. 

3)  Move in front of camera. When red light is flashing you see the area which is covered by the PIR sensor

4)  It is recommended to test the position and take several test photos, to see the area covered by the camera

5)  Switch the camera off now

Switch camera to “ON”, after 15-30 seconds camera is ready

Options to check if the camera has taken pictures:

1)  Open camera housing and enter Setup mode

2)  The lower line of starting menu shows the number of pictures taken and the remaining full space

3)  Press OK to view the pictures

4)  Alternatively switch camera off and exchange the memory card by a fresh one. So you can view images on your computer or TV.

It is recommended to check the battery status as well. When capacity goes down, it will be more difficult to achieve correctly illuminated night shots. 

In case of doubt, replace batteries by new ones.

1. Memory card 
We recommend using the Dörr 4GB SDHC card 991050 memory card, which allows to store approx. 4000 pictures. Camera support cards up to 16GB.

2. Lens rattle
A filter covers the lens, it allows colored pictures at daylight and black & white shots at night. When camera is turned off the filter is not fixed which can cause the rattle. 

Never mind your camera is not defective.

3. Weather resistance
Although the camera is weather resistant, we recommend to mount the camera in a protected area, where it is not exposed to direct rain or permanent sun.

4. Motion Detector (PIR Sensor) 

The sensor reacts under specific condition and within a certain range. Generally the detection range is slightly smaller then the camera´s picture angle. The detection of 

objects depends on temperature and other circumstances like vegetation and reflecting areas. Ideal conditions, perfect adjustment and high sensibility allow the camera to 

reach 20m triggering. An average of 10m should be considered normal. Several testings are necessary to get the best position for the camera.

5. Light conditions
Consider that back light is not good to take proper pictures. 

Carefully choose the position of camera, so it is not directly facing sun or complete shadow.

DÖRR GmbH • Postfach 128

89202 Neu-Ulm/Germany

Fon +49 731 97037-0 • Fax +49 731 97037-37

info@doerrfoto.de • www.doerrfoto.de