Cisco Aironet 1242 802.11g non-modular Cisco IOS access point, RP-TNC AIR-AP1242G-A-K9 Hoja De Datos
Los códigos de productos
AIR-AP1242G-A-K9
Data Sheet
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 5 of 7
Item
Specification
Status LEDs
●
Status LED indicates operating state, association status, error
or warning condition, boot sequence, and maintenance status.
●
Ethernet LED indicates status of activity over the Ethernet.
●
Radio LED indicates status of activity over the radio.
Dimensions (H x W x D)
1.1 x 6.6 x 8.5 in. (2.79 x 16.76 x 21.59 cm)
Weight
2.0 lb (0.9 kg)
Environmental
●
Nonoperating (storage) temperature: –40 to 185°F (–4 0 to
85°C)
●
Operating temperature: –4 to 131°F (–20 to 55°C)
●
Operating humidity: 10 to 90 percent (noncondensing)
System memory
●
32 MB RAM
●
16 MB flash memory
Input power requirements
●
100 to 240 VAC; 50 to 60 Hz (power supply)
●
36 to 57 VDC (device)
Powering options
●
Local power
●
802.3 AF switches
●
Cisco higher-power switches capable of supporting 13W or
greater
●
Cisco Aironet power injectors (PWRINJ3 and PWRINJ-FIB)
●
Third-party PoE devices (must meet input power and power
draw requirements)
Power draw
●
12.95W maximum
Note: 12.95W is the maximum power required at the powered
device. If the access point is being used in a PoE configuration, the
power drawn from the power sourcing equipment will be higher by
some amount dependent on the length of the interconnecting
cable. This additional power can be as high as 2.45W, bringing
the total system power draw (access point and cabling) to 15.4W.
device. If the access point is being used in a PoE configuration, the
power drawn from the power sourcing equipment will be higher by
some amount dependent on the length of the interconnecting
cable. This additional power can be as high as 2.45W, bringing
the total system power draw (access point and cabling) to 15.4W.
Warranty
90 days
Wi-Fi certification
System Requirements
Table 3 lists the system requirements for Cisco Aironet 1240G Series Access Points.
Table 3.
System Requirements for Cisco Aironet 1240G Series Access Points
Access Method
Description
Browser
Using the Web browser management GUI requires a computer running Internet Explorer
Version 6.0 or later, or Netscape Navigator Version 7.0 or later.
Version 6.0 or later, or Netscape Navigator Version 7.0 or later.
PoE
Power sourcing equipment is compliant with Cisco Inline Power or IEEE 802.3af,
and provides at least 12.94W at 48 VDC.
and provides at least 12.94W at 48 VDC.