Linksys Phone Adapter with 2 Ports for Voice-over-IP PAP2 Prospecto

Los códigos de productos
PAP2
Descargar
Página de 2
Product Data
Model No.
Features
• Two voice ports (RJ-11) for 
analog phones or fax 
machines with two 
independent telephone 
numbers
• One RJ-45 port for 10Base-T 
Ethernet connection
• Supports Dynamic Host 
Configuration Protocol (DHCP)
• Supports Session Initiation 
Protocol (SIP)
• Supports multiple voice 
compression G.711, G.726, 
G.729, and G.723.1
• Web-based configuration 
through a built-in web server
• Telephone key pad 
configuration via voice 
prompts
• Supports DTMF tone detection 
and generation
• Supports FSK Caller ID, DTMF 
Caller ID and FSK VMWI
• Support echo cancellation 
and Voice Activity Detection 
(VAD)
• Password protected access 
and configuration
• Supports auto-provisioning with 
remote firmware upgrade
Linksys
A Division of Cisco Systems, Inc.
18582 Teller Avenue
Irvine, CA  92612 USA
E-mail:
sales@linksys.com
support@linksys.com
Web:
http://www.linksys.com
Linksys products are available in more than 50 
countries, supported by 12 Linksys Regional Offices 
throughout the world. For a complete list of local 
Linksys Sales and Technical Support contacts, visit 
our Worldwide Web Site at www.linksys.com.
PAP2
with 2 Ports for Voice-over-IP
Phone Adapter
Specifications
Model
PAP2
Standards
IEEE 802.3 (10BaseT), IEEE 802.3u (100BaseTX)
Ports
One 10/100 RJ-45 Network Port, 
Two Standard Phone Ports, One Power Port
Cabling Type
RJ-45 Ethernet Category 5, 
RJ-11 Standard Phone Cable
LEDs
Power, Ethernet, Phone1, Phone2 
Voice Protocol
Session Initiation Protocol (SIP v2) 
Voice Codecs
G.711 a-law, G.711µ-law, G.726, G.729 A, G.723.1
Ringer Equivalence
Number (REN)
5 REN per RJ-11 port
Ring Frequency
10 Hz - 40 Hz
FXS Port Impedance
Eight Configurable Setting Including North America
600 ohms, European CTR21
Ring Voltage
60 - 90 Vrms Configurable
Security Features
Password-Protected Administration
Environmental
Dimensions
101 mm x 101 mm x 15 mm
(3.98" x 3.98" x 0.59")
Unit Weight
4.80 oz. (0.14 kg)
Power Input
5V DC 2.0A
Certifications
FCC, cUL, CE
Operating Temp.
41ºF to 113ºF (5ºC to 45ºC) 
Storage Temp.
-13ºF to 185ºF (-25ºC to 85ºC) 
Operating Humidity
10% to 90%, Non-Condensing
Storage Humidity
5% to 90%, Non-Condensing
PAP2-DS-40810B JL
Package Contents
• Phone Adapter
• Power Adapter 
• User  Guide  on  CD-ROM
• Network  Cable
• Quick  Installation
• Registration Card
• Vonage Service Materials
Minimum Requirements
• High-speed Internet connection 
(cable/DSL/other) 
• Broadband Router or Gateway to share 
Internet connection
• Regular analog touch-tone telephone or 
fax machine
• CD-ROM drive
Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2004 
Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.