BTR NETCOM BTR Keystone module CAT 6A K 90° 130B23-E Hoja De Datos
Los códigos de productos
130B23-E
Datenblatt / Data sheet
C6
A
modul K 90°
130B23-E
Produktbeschreibung
Product specification
Bestell-Nr. / Part no.
Abbildungen / Illustration
Maßzeichnung / Dimensions
14.91 0.13
[0.587±0.005]
±
für Materialstärke 1.5±0.05
[for material thickness 0.059±0.001]
[for material thickness 0.059±0.001]
19.45±0.15
[0.765±0.006]
Einbauausschnitt / Cut out
Seite/Page 1/2
• modulare Anschlusseinheit RJ45
• GHMT Cat.6
• GHMT Cat.6
A
re-embedded PVP zertifiziert
• Cat.6
A
Komponentenprüfung nach ISO/IEC 11801 Ed.2.2:2011-06,
DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) und
IEC 60603-7-51 Ed.1 (12/2008), GHMT zertifiziert
• Einhaltung der Klasse E
• Einhaltung der Klasse E
A
bis 500 MHz
nach ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
• getestet: Komponente bis 600 MHz, Link bis 800 MHz
• für 10 GBit Ethernet (IEEE 802.3an)
• geeignet für Power over Ethernet (PoE, PoE plus und UPoE)
• montagefreundlicher Anschluss von Datenleitungen
• getestet: Komponente bis 600 MHz, Link bis 800 MHz
• für 10 GBit Ethernet (IEEE 802.3an)
• geeignet für Power over Ethernet (PoE, PoE plus und UPoE)
• montagefreundlicher Anschluss von Datenleitungen
AWG 26/1 - 22/1 (eindrähtig) und AWG 26/7 bis 22/7 (mehrdrähtig)
an IDC-Schneidklemmen
• intelligentes Kabelmanagement im Ladestück, auch für stark
• intelligentes Kabelmanagement im Ladestück, auch für stark
verdrillte Leitungen geeignet
• Kennzeichnung der Adernbelegung T568A und T568B direkt auf
• Kennzeichnung der Adernbelegung T568A und T568B direkt auf
dem Ladestück
• robustes, einteiliges und wieder verwendbares Modulgehäuse aus
• robustes, einteiliges und wieder verwendbares Modulgehäuse aus
Zinkdruckguss, veredelt
• Montage ohne Spezialwerkzeug, Zugentlastung per Rastclip direkt
• Montage ohne Spezialwerkzeug, Zugentlastung per Rastclip direkt
am Ladestück
• Einbauform: Keystone, Kabelzuführung 90°
• Einbauform: Keystone, Kabelzuführung 90°
• modular termination unit RJ45
• certified to GHMT Cat.6
• certified to GHMT Cat.6
A
re-embedded PVP
• component testing for Cat.6
A
to ISO/IEC 11801 Ed.2.2:2011-06,
DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and
IEC 60603-7-51 Ed.1 (12/2008), certified to GHMT
• compliance with class E
• compliance with class E
A
up to 500 MHz to
ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
• tested: component up to 600 MHz, link up to 800 MHz
• for 10 GBit Ethernet (IEEE 802.3an)
• suitable for Power over Ethernet (PoE, PoE plus and UPoE)
• easy to install connection of data lines AWG 26/1 to 22/1
• tested: component up to 600 MHz, link up to 800 MHz
• for 10 GBit Ethernet (IEEE 802.3an)
• suitable for Power over Ethernet (PoE, PoE plus and UPoE)
• easy to install connection of data lines AWG 26/1 to 22/1
(solid wire) and AWG 26/7 to 22/7 (stranded wire) to insulation
displacement connectors (IDC)
• intelligent cable management in stuffer cap - also suitable for
• intelligent cable management in stuffer cap - also suitable for
heavily twisted cables
• conductor assignment to T568A and T568B is directly printed on
• conductor assignment to T568A and T568B is directly printed on
the stuffer cap
• solid, one-piece and reusable module housing refined with
• solid, one-piece and reusable module housing refined with
zinc die-casting
• mounting without special tools; strain relief directly snapped on to
• mounting without special tools; strain relief directly snapped on to
stuffer cap
• mounting version: Keystone, 90° cable feed
• mounting version: Keystone, 90° cable feed
2014-04-11
© 2014 METZ
CONNECT
- Technische Änderungen vorbehalten! Subject to modifications!
METZ CONNECT GmbH
Im Tal 2 | 78176 Blumberg | Deutschland
Tel. +49 7702 533-0 | Fax +49 7702 533-433
Weiterführende Dokumentation siehe www.metz-connect.com
Im Tal 2 | 78176 Blumberg | Deutschland
Tel. +49 7702 533-0 | Fax +49 7702 533-433
Weiterführende Dokumentation siehe www.metz-connect.com