TP-LINK AV500 TL-WPA4226T KIT Prospecto
Los códigos de productos
TL-WPA4226T KIT
For non-passthrough powerline device
For passthrough powerline device
AV500
AV500
Quick Installation Guide
Method 1: Plug and Play
Create a New Wireless Network
WiFi Powerline Extender 3-pack Kit
1.
Write down the default wireless network names
(SSIDs) and passwords of both TL-WPA4220s.
* The default SSID is TP-LINK_xxxxxx. (xxxxxx indicates the last six unique
characters of the WLAN MAC address.)
characters of the WLAN MAC address.)
Wireless Network
Name (SSID)*:
Name (SSID)*:
TP-LINK_xxxxxx
Wireless Password:
xxxxxxxx
Installation is completed when all the
Powerline LEDs turn solid.
Powerline LEDs turn solid.
1. Make sure the additional devices use factory default settings. If not,
please reset them.
2. Plug them into the outlets and wait about 1 minute until their
Powerline LEDs turn solid.
please reset them.
2. Plug them into the outlets and wait about 1 minute until their
Powerline LEDs turn solid.
If the Powerline LEDs do not turn solid, please follow the instructions in
FAQ->Q1:
1. For the two devices connected before, use the Pair Button to create a
powerline network (Q1->A). (Skip this step if you have already done this.)
2. For additional devices, use the Pair Button to join the existing powerline
network (Q1->B).
FAQ->Q1:
1. For the two devices connected before, use the Pair Button to create a
powerline network (Q1->A). (Skip this step if you have already done this.)
2. For additional devices, use the Pair Button to join the existing powerline
network (Q1->B).
Read this to install additional devices
TL-PA4010
TL-WPA4220
TL-WPA4220
AV500
Additional
Device
Device
AV500
AV500
If the Powerline LEDs don’t turn solid, reset all the powerline devices, or create
a powerline network by referring to FAQ-Q1.
a powerline network by referring to FAQ-Q1.
All the Powerline LEDs will turn
solid within 1 minute.
solid within 1 minute.
Enjoy!
Use the default
SSID (TP-LINK_xxxxxx or TP-LINK_yyyyyy)
and
password your wrote down to access the Internet.
2.
Connect your devices as follows.
TL-WPA4220
TL-WPA4220
AV500
AV500
SSID:
TP-LINK_yyyyyy
SSID:
TP-LINK_xxxxxx
A powerline network requires at least two powerline
devices. We use the powerline adapter TL-PA4010 as an
example to work with TL-WPA4220.
devices. We use the powerline adapter TL-PA4010 as an
example to work with TL-WPA4220.
Note
If your home or office already has powerline adapters,
remove them first, install TL-WPA4220 using Method 1
or Method 2, and then add your existing adapters to the
powerline network.
If your home or office already has powerline adapters,
remove them first, install TL-WPA4220 using Method 1
or Method 2, and then add your existing adapters to the
powerline network.
LAN
WAN
TL-PA4010
SSID:
ABCDE
Internet
Power
On: The device is on.
Off: The device is off.
Blinking: The device is pairing.
Powerline
On: The device is connected to a powerline network.
Off: The device isn’t connected to any powerline network.
Blinking: The device is transferring data.
Ethernet
On: At least one Ethernet port is connected.
Off: No Ethernet port is connected.
Wi-Fi
Off: The wireless function is disabled.
Blinking quickly: The wireless function is enabled.
Blinking every second: The device is cloning Wi-Fi settings from
a router.
a router.
LED Indicators
AV500
AV500
Ethernet
Ports
Ports
Reset
Button
Button
Pair
Button
Button
Wi-Fi/Wi-Fi Clone
Button
Button
7106504791 REV3.0.0