Netgear DUALBAND WLAN WNDAP360 N300 AP WNDAP360-PES Manual De Usuario
Los códigos de productos
WNDAP360-PES
Advanced Configuration
84
ProSafe Dual Band Wireless-N Access Point WNDAP360
Configure Advanced Wireless Settings
You use the advanced Wireless Settings screen to configure and enable various WLAN
settings for 802.11b, 802.11bg, or 802.11ng wireless mode. The active wireless mode is
indicated on screen. (For information about how to change the wireless mode, see
settings for 802.11b, 802.11bg, or 802.11ng wireless mode. The active wireless mode is
indicated on screen. (For information about how to change the wireless mode, see
The default WLAN settings normally work well. However, you can use these settings to
fine-tune the overall performance of your wireless access point for your environment.
fine-tune the overall performance of your wireless access point for your environment.
To configure advanced wireless settings:
1.
Select Configuration > Wireless > Advanced > Wireless Settings. The advanced
Wireless Settings screen displays. (The following figure shows the 11ng settings—see
the wireless icon that is displayed next to ng.)
Wireless Settings screen displays. (The following figure shows the 11ng settings—see
the wireless icon that is displayed next to ng.)
Figure 51.
2.
Optionally: To configure advanced wireless settings for the 802.11a/na modes, click the
802.11a/na tab.
802.11a/na tab.