Rigol MSO1074Z-S 4-channel oscilloscope, Digital Storage oscilloscope, MSO1074Z-S Manual De Usuario
Los códigos de productos
MSO1074Z-S
RIGOL
DS1000Z Quick Guide
10
trigger via this interface, connect the signal to a waveform
display instrument to measure the frequency of the signal and
the result is equal to the current capture rate.
Pass/Fail: there will be output a negative pulse signal when
failed waveforms are detected by the oscilloscope. Connect
this signal to other control systems to view the test result
conveniently. There will be output a 3.3 V CMOS high level
when no failed waveform is detected by the oscilloscope.
display instrument to measure the frequency of the signal and
the result is equal to the current capture rate.
Pass/Fail: there will be output a negative pulse signal when
failed waveforms are detected by the oscilloscope. Connect
this signal to other control systems to view the test result
conveniently. There will be output a 3.3 V CMOS high level
when no failed waveform is detected by the oscilloscope.
5. Signal Output
When the output of Source1 and Source2 are enabled, the
signal currently set can be output to the analog input terminal
of the oscilloscope or external devices connected to them
through the [Source1] and [Source2] connectors at the
rear panel.
signal currently set can be output to the analog input terminal
of the oscilloscope or external devices connected to them
through the [Source1] and [Source2] connectors at the
rear panel.
6. Lock Hole
You can lock the instrument to a fixed location using the
security lock (please buy it yourself) via the lock hole.
security lock (please buy it yourself) via the lock hole.
7. Fuse
If a new fuse is required, please use the specified fuse (250V,
T2A). The operation method is as follows:
a) Turn off the instrument and remove the power cord.
b) Insert a small straight screwdriver into the slot at the
T2A). The operation method is as follows:
a) Turn off the instrument and remove the power cord.
b) Insert a small straight screwdriver into the slot at the
power socket and prize out the fuse seat gently.
c) Take out the fuse and replace it with a specified fuse, and
then install the fuse seat to the original position.
8. AC Power Socket
AC power input terminal. The power requirement of this