Rigol DS2072A 2-channel oscilloscope, Digital Storage oscilloscope, DS2072A Hoja De Datos

Los códigos de productos
DS2072A
Descargar
Página de 10
DC Offset Accuracy
±0.1 div ± 2 mV ± 1% offset value
Channel to Channel Isolation
DC to maximum bandwidth: >40 dB
Trigger
Trigger Level Range
Internal
± 5 div from center of the screen
EXT
± 4 V
Trigger Mode
Auto, Normal, Single
Holdoff Range
100 ns to 10 s
High Frequency Rejection
1
75 kHz 
Low Frequency Rejection
1
75 kHz 
Trigger Sensitivity
1 div (below 10 mV or noise rejection is enabled)
0.3 div (above 10 mV and noise rejection is disabled)
Edge Trigger
Edge Type
Rising, Falling, Rising&Falling
Pulse Trigger
Pulse Condition
Positive Pulse Width (greater than, lower than, within specific interval)
Negative Pulse Width (greater than, lower than, within specific interval)
Pulse Width Range
2 ns to 4 s
Runt Trigger
Pulse Width Condition
None, >, <, <>
Pulse Polarity
Positive, Negative 
Pulse Width Range
2 ns to 4 s
Windows Trigger (Option)
Windows Type
Rising, Falling, Rising&Falling
Trigger Position
Enter, Exit, Time
Windows Time
16 ns to 4 s
Nth Edge Trigger (Option)
Edge Type
Rising, Falling
Idle Time
16 ns to 10 s
Edge Number
1 to 65535
Slope Trigger
Slope Condition
Positive Slope (greater than, lower than, within specific interval)
Negative Slope (greater than, lower than, within specific interval)
Time Setting
2 ns to 4 s
Video Trigger (HDTV Option)
Signal Standard
Support standard NTSC, PAL and SECAM broadcasting standards; support 480P, 576P, 720P, 1080P and 
1080I HDTV standards
Pattern Trigger
Pattern Setting
H, L, X, Rising, Falling
Delay Trigger (Option)
Edge Type
Rising, Falling
Delay Type
>, <, <>, ><
Delay Time
2 ns to 4 s
TimeOut Trigger (Option)
Edge Type
Rising, Falling, Rising&Falling
Timeout time
16 ns to 4 s
Duration Trigger (Option)
Pattern
H, L, X
Trigger Condition
>, <, <>
Duration Time
2 ns to 4 s
Setup/Hold Trigger
Edge Type
Rising, Falling
Data Type
H, L
Setup Time
2 ns to 1 s
Hold Time
2 ns to 1 s
RS232/UART Trigger
Polarity
Normal, Invert
Trigger Condition
Start, Error, Check Error, Data
Baud Rate
2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, User 
Data Bits
5 bit, 6 bit, 7 bit, 8 bit
I2C Trigger
Trigger Condition
Start, Restart, Stop, Missing ACK, Address, Data, A&D
Address Bits
7 bit, 8 bit, 10 bit
Address Range
0 to 127, 0 to 255, 0 to 1023
Byte Length
1 to 5
RIGOL
6