Rigol DS2202A 2-channel oscilloscope, Digital Storage oscilloscope, DS2202A Manual De Usuario
Los códigos de productos
DS2202A
RIGOL
DS2000A User’s Guide
1-14
TRIGGER
MODE: press this key to switch the trigger mode to
Auto, Normal or Single and the corresponding
state backlight of the current trigger mode would
be illuminated.
TRIGGER
state backlight of the current trigger mode would
be illuminated.
TRIGGER
LEVEL: modify the trigger level.
Turn clockwise to increase the level and turn
counterclockwise to reduce the level. During the
modification, the trigger level line would move up
counterclockwise to reduce the level. During the
modification, the trigger level line would move up
and down and the value in the trigger level message box (e.g.
) at the
lower-left corner of the screen would change accordingly. Pressing down the knob
will quickly reset the trigger level to zero point.
will quickly reset the trigger level to zero point.
MENU: press this key to open the trigger operation menu. This oscilloscope provides
various trigger types.
FORCE: in Normal and Single trigger modes, press this key to generate a trigger
signal forcefully.
CLEAR
Press this key to clear all the waveforms on the screen. If
the oscilloscope is in “RUN” state, new waveforms will
still be displayed.
RUN/STOP
Press this key to set the state of the oscilloscope to
“RUN” or “STOP”.
In “RUN” state, the key is illuminated in yellow.
In “STOP” state, the key is illuminated in red.