Rigol DS2202A 2-channel oscilloscope, Digital Storage oscilloscope, DS2202A Manual De Usuario
Los códigos de productos
DS2202A
RIGOL
DS2000A User’s Guide
2-7
Channel Label
You can modify the labels used to mark the analog channels (CH1 and CH2) at the
left side of the screen. The label is the number of the channel (such as
) by
default and the length of the label can not exceed 4 characters. Note: Only English
input method can be used for this operation.
Press CH1 Label to enter the label modification interface as shown in the figure
below.
input method can be used for this operation.
Press CH1 Label to enter the label modification interface as shown in the figure
below.
For example, change “
” to “
”.
Press Keyboard to select the “Keyboard” area. Select “Aa” using
and press
down
to switch it to “
a
A”. Select “C” using
and press down
to input the
character. Use the same method to input “hn1”.
To modify or delete the input character, press Name to select the “Name Input Area”
and use
To modify or delete the input character, press Name to select the “Name Input Area”
and use
to select the character to be modified or deleted. Enter the desired
character or press Delete to delete the character selected.
After finishing the input, press OK to finish the modification and the channel label
will change to “
After finishing the input, press OK to finish the modification and the channel label
will change to “
”.
Name Input Area Keyboard Upper/Lower Case Switch