Rigol DS2102A 2-channel oscilloscope, Digital Storage oscilloscope, DS2102A Manual De Usuario
Los códigos de productos
DS2102A
RIGOL
DS2000A User’s Guide
9-4
Press Output to select “Fail” or “Fail+
”.
Fail: when failed waveforms are detected, there are display and output but the
beeper does not sound.
Fail+
: when failed waveforms are detected, there are display and output and
the beeper sounds (not related to the on/off state of the sound).
Press AuxOutput to quickly turn “ON” or “OFF” the output of test results from the
[Trigger Out] connector at the rear panel. You can also press Utility
AuxOutput and select “PassFail” to set this output.
[Trigger Out] connector at the rear panel. You can also press Utility
AuxOutput and select “PassFail” to set this output.
To Save the Test Mask
Users can save the current test mask to the internal Flash memory or external USB
storage device. The file format of the test mask file is “*.pf”. The internal memory
can store at most 10 test mask files (LocalPF.pf).
Press Save to enter the file store interface. Please refer to the relative descriptions in
To Load the Test Mask
Users can also load the test mask files (*.pf) stored in the internal Flash memory or
external USB storage device to the internal memory.
Press Load to enter the file recall interface. Please refer to the relative descriptions
in
instrument.