Rigol DS2102A 2-channel oscilloscope, Digital Storage oscilloscope, DS2102A Manual De Usuario
![Rigol](https://files.manualsbrain.com/attachments/4ef153c5b3a9e56ac40ea738ae281ea9dc808cdc/common/fit/150/50/a84f25c70c016e6b8d8e8d0fbe042c3bbe7b8a8feeee0ecbbc25ec79cb57/brand_logo.gif)
Los códigos de productos
DS2102A
RIGOL
DS2000A User’s Guide
1-18
Source
Press this key to enter the signal source setting interface. You can
turn onor off the outpts of the [Source1] and [Source2]
connectors and set the parameters of the output signal (such as the
frequency, amplitude, offset and phase).
turn onor off the outpts of the [Source1] and [Source2]
connectors and set the parameters of the output signal (such as the
frequency, amplitude, offset and phase).
Note: This function is only applicable to DS2000A-S.
Record
Record: press this key to start recording the waveform. The backlight is illuminated
in red. Besides, when record constant on (Open) is enabled, the backlight will also be
illuminated.
Play/Pause: in stop or pause state, press this key to play back the waveform and
press again to pause
the play. The backlight is illuminated in yellow.
Stop: press this key to stop the waveform being recorded or being played back. The
backlight is illuminated in orange.
Stop Play/Pause Record