Rigol DS2202A-S 2-channel oscilloscope, Digital Storage oscilloscope, DS2202A-S Manual De Usuario
Los códigos de productos
DS2202A-S
RIGOL
DS2000A User’s Guide
12-17
8. Done
Press Done to finish editing the current waveform.
9. Save
Press Save to enter the file store interface. Please refer to the introduction in
internal memory (you can overwrite the original file or save the current
waveform again).You can select the arbitrary waveforms in the internal or
external memory for output. For details, refer to the introduction in
waveform again).You can select the arbitrary waveforms in the internal or
external memory for output. For details, refer to the introduction in
Modulation
The built-in signal generator of DS2000A series oscilloscope supports amplitude
modulation (AM) and frequency modulation (FM). The modulated waveform consists
of the carrier waveform and modulating waveform. The carrier waveform is the
waveform output from the signal generator and the modulating signal can be the
built-in sine, square, ramp waveform or noise signal.
Press Modulation to open the modulation setting menu. You can turn on or off the
modulation function and set the modulation parameters.
modulation function and set the modulation parameters.
1. Select the modulation type
Press Mod. Type to set the modulation type of the current signal.
AM: the amplitude of the carrier waveform changes with the amplitude of
AM: the amplitude of the carrier waveform changes with the amplitude of
the modulating waveform.