Lecroy WSXS CANBUS TD WSXS-CANBUS TD trigger and decoder extension Compatible with LeCroy WaveSurfer® Oscilloscopes. WSXS-CANBUS TD Manual De Usuario
Los códigos de productos
WSXS-CANBUS TD
CANbus TD Overview
902338-00
8/04
8/04
© 2004 by LeCroy Corporation. All rights reserved.
LeCroy, ActiveDSO, ProBus, SMART Trigger, JitterTrack,WavePro,WaveMaster, and Waverunner are registered trademarks of LeCroy Corporation.
Information in this publication supersedes all earlier versions. Specifications subject to change without notice.
Information in this publication supersedes all earlier versions. Specifications subject to change without notice.
Open the CAN Trace setup dialog by touching this
area. Select the source channel for the CAN Trace in
this dialog, and turn the CAN Trace ON/OFF. The
source can also be a memory or a math
function. Also select whether you are using a
single-ended or differential probe.
area. Select the source channel for the CAN Trace in
this dialog, and turn the CAN Trace ON/OFF. The
source can also be a memory or a math
function. Also select whether you are using a
single-ended or differential probe.
Touch this area to open the CAN Zoom dialog.
Control the CAN Zoom trace from this dialog,
and turn it ON/OFF.
Control the CAN Zoom trace from this dialog,
and turn it ON/OFF.
Descriptor labels allow quick access to dialogs.
Touch them to open the dialog specific to that
descriptor label.
Touch them to open the dialog specific to that
descriptor label.
The CAN trigger can be set up from within the
Trigger dialog. Touch the Trigger descriptor label,
then select the CAN Trigger tab. You can also
access the Trigger dialog from the menu bar.
Trigger dialog. Touch the Trigger descriptor label,
then select the CAN Trigger tab. You can also
access the Trigger dialog from the menu bar.
The Timebase dialog can be used to fix the sample
rate to a specific value. Touch the Timebase descriptor
label to open the dialog. Use a value at least 4x the
bit rate,or the decoding algorithm will not compute.
rate to a specific value. Touch the Timebase descriptor
label to open the dialog. Use a value at least 4x the
bit rate,or the decoding algorithm will not compute.
.
Add cursors to your display by touching this
area and selecting the appropriate cursors.
Adjust cursor position with the front panel knobs.
Or, turn the cursor knobs to turn cursors ON.
area and selecting the appropriate cursors.
Adjust cursor position with the front panel knobs.
Or, turn the cursor knobs to turn cursors ON.
Add measurement parameters by touching
this area. Or, touch the MEASURE button in the
toolbar in the CAN Trace and CAN Zoom dialogs.
this area. Or, touch the MEASURE button in the
toolbar in the CAN Trace and CAN Zoom dialogs.
A descriptor label with a different color
background indicates that this trace is “Active”.
If it is a CAN Zoom, Memory, or Math Trace,
and is “Active”,the front panel zoom controls
will zoom and position that particular trace.
background indicates that this trace is “Active”.
If it is a CAN Zoom, Memory, or Math Trace,
and is “Active”,the front panel zoom controls
will zoom and position that particular trace.
Escape from the CANbus TD program at any
time to add math, measurement parameters,
or to make changes to your setup. Re-enter
through Analysis, or by touching the CAN Trace
or CAN Zoom descriptor labels below the grid.
time to add math, measurement parameters,
or to make changes to your setup. Re-enter
through Analysis, or by touching the CAN Trace
or CAN Zoom descriptor labels below the grid.
1
1
2
2
3
4
5
6
7
9
9
9
9
Sales and Service
Throughout the World
Throughout the World
Corporate Headquarters
700 Chestnut Ridge Road
Chestnut Ridge, NY 10977
USA
www.lecroy.com
Chestnut Ridge, NY 10977
USA
www.lecroy.com
LeCroy Sales Offices:
China: Beijing
Phone (86) 10 8526 1618
Fax (86) 10 8526 1619
Phone (86) 10 8526 1618
Fax (86) 10 8526 1619
France: Les Ulis
Phone (33) 1 6918 8320
Fax (33) 1 6907 4042
Phone (33) 1 6918 8320
Fax (33) 1 6907 4042
Germany: Heidelberg
Phone (49) 6221 827 00
Fax (49) 6221 834 655
Phone (49) 6221 827 00
Fax (49) 6221 834 655
Hong Kong
Phone (852) 2834 5630
Fax (852) 2834 9893
Phone (852) 2834 5630
Fax (852) 2834 9893
Italy: Venice
Phone (39) 041 599 7011
Fax (39) 041 456 9542
Phone (39) 041 599 7011
Fax (39) 041 456 9542
Japan: Osaka
Phone (81) 6 6396 0961
Fax (81) 6 6396 0962
Phone (81) 6 6396 0961
Fax (81) 6 6396 0962
Japan: Tokyo
Phone (81) 3 3376 9400
Fax (81) 3 3376 9587
Phone (81) 3 3376 9400
Fax (81) 3 3376 9587
Korea: Seoul
Phone (82) 2 3452 0400
Fax (82) 2 3452 0490
Phone (82) 2 3452 0400
Fax (82) 2 3452 0490
Singapore
Phone (65) 6442 4880
Fax (65) 6442 7811
Phone (65) 6442 4880
Fax (65) 6442 7811
Sweden: Stockholm
Phone (46) 8 580 143 45
Fax (46) 8 580 143 45
Phone (46) 8 580 143 45
Fax (46) 8 580 143 45
Switzerland: Geneva
Phone (41) 22 719 2228 (North)
Phone (41) 22 719 2175
(South)
Fax (41) 22 719 2230
Phone (41) 22 719 2228 (North)
Phone (41) 22 719 2175
(South)
Fax (41) 22 719 2230
U.K.: Abingdon
Phone (44) 1 235 536 973
Fax (44) 1 235 528 796
Phone (44) 1 235 536 973
Fax (44) 1 235 528 796
U.S.A.: Chestnut Ridge
Phone (1) 845 578 6020
Fax (1) 845 578 5985
Phone (1) 845 578 6020
Fax (1) 845 578 5985
4
6
4
5
8
7
8
3
This is an analog signal that is
time-correlated with the CAN Trace.
This is the CAN Zoom Trace
This is the CAN Trace capture