Beha Amprobe GT-800 PRO KITVDE-tester 4472081 Manual De Usuario
Los códigos de productos
4472081
GT-600/GT-800 Instruction Manual
44
Idle display explanation:
Figure 36: Idle display in AUTO function
1 ...... “
” soft menu key, to move the cursor down in order to check the set of
tests to be done.
2 ...... “
” soft menu key, to move the cursor up in order to check the set of
tests to be done.
3 ...... “A
” soft menu key, to select appropriate AUTO Test (decreasing the
AUTO Test number).
4 ...... “A
” soft menu key, to select appropriate AUTO Test (increasing the
AUTO Test number).
5 ...... Protection class of selected AUTO Test.
6 ...... Appliance/AUTO-Test description.
7 ...... Number of selected AUTO Test.
8 ...... Tests, test parameters and limit values.
Test procedure:
6 ...... Appliance/AUTO-Test description.
7 ...... Number of selected AUTO Test.
8 ...... Tests, test parameters and limit values.
Test procedure:
-
Select AUTO Test mode by using the rotary switch (6), idle display will
appear.
-
Select appropriate AUTO Test by using the “A ” and “A ” soft menu
keys.
-
Connect the appliance and test leads as required by the first test, e.g. R
PE
(see the instructions for individual tests).
-
Press the START key, visual inspection will be required.
-
Do the visual inspection (see the section “Visual Inspection”). If the visual
test passes, confirm the action by pressing the “YES” soft menu key then
the next test is offered e.g. R
the next test is offered e.g. R
PE
.
-
Connect test lead to the first accessible conductive part and press the
“START” key, measurement is carried out and test result is displayed.
-
Repeat the test for all accessible conductive parts, then press the “NEXT”
key in order to move to the next test e.g. R
ISO
. The worst R
PE
test result
(the highest) is displayed, ready for later memorizing.
-
Do all tests required by selected AUTO Test following the same procedure
as for the first test.
-
Press the “END” soft menu key after finishing all tests, display turns to
“check” mode, you may check all sub-results (worst result in each
function) by using the “
function) by using the “
” and “
” soft menu keys.