Fluke 1653B06-TPOLEKIT/DVDE-tester 4425924 Manual De Usuario

38 

2.  To enable the data subset number to be changed, press . The data 

subset number will now be flashing. To enable the data sub number to be 
changed, press  again. The data set number will now be flashing. Press 
 again to change the data id number. 

3.  Press the down arrow key () to decrement the enabled number or press 

the up arrow key () to increment the enabled number. For storing data, 
the number can be set to any value, overwriting existing data is allowed. 
For recalling data, the number can only be set to used values.  

If you press the up or down arrow key () once, the number 
increments or decrements by one. To accelerate the increment or 
decrement function, press and hold the up or down arrow. 

1. Press 

 to enter Memory mode. 

2. Press 

 and use the arrow keys () to set the data identity. 

3. Press 

 to save the data. 

•

 

If memory is full, FULL will appear on the primary display. Press  to 
choose another data identity, press  to exit Memory mode. 

•

 

If the memory is not full, the data will be saved, the tester will 
automatically exit Memory mode and the display will revert back to the 
previous test mode. 

•

 

If the data identity has been previously used, the display will show 
STO? Press  again to store the data, press  to choose another 
data identity, press  to exit Memory mode. 

For insulation and continuity tests, you can store additional information with the 
measurement result. For more information, see "Measuring Insulation 
Resistance" and "Measuring Continuity". 

1. Press 

 to enter the Memory mode.  

2. Press 

 to enter the Recall mode.  

3. Use 

 and the arrow keys () to set the data identity. If no data has been 

saved, all fields will be dashes.