Gossen Metrawatt M817S Mains-analysis device, Mains analyser M817S Hoja De Datos

Los códigos de productos

M817S

5-28

Monitoring at a Specified Time and Date

Monitoring at a Specified Time and Date

Schedule
monitoring

Follow these steps to set monitoring at a specified time and date.

Action...

Result...

STEP 1: From the Automatic Setup

screen, press OK to start

monitoring (see page 5-3). The

Monitoring Menu screen will be

displayed.

STEP 1: From the Start Menu

screen (see page 5-2), press

Monitor Same Circuit.

NOTE: The Monitoring Menu

screen will only be available after

setting up the instrument or from

reading a setup template from the

memory card.

STEP 1: At the end of the Wizard

Setup, the Site Name/Memory Card

screen prompts users to press

Finish so as to start monitoring (see

page 5-21). The Monitoring Menu

screen will be displayed.

• To set monitoring at a specified

date and time, press Monitor
using Start and End times

Proceed to Step 2.

For functional descriptions of the

other buttons, refer to Section C

Monitor Same Circuit - Turning

Monitoring On/Off on page 5-25.

MARK121

STEP 2: The Energy Platform will

monitor and collect data using

either of the following monitoring

schedules:

• Press Start & End time to

specify the date/time when the

unit will begin and end

monitoring. See page 5-29.

• Press Time Interval to specify

the length of the recording

interval for each file, and the

time/date to start monitoring

interval. See page 5-32.

• Press Cancel to quit and return

to the monitoring menu.

MARK125a