Gossen Metrawatt M817S Mains-analysis device, Mains analyser M817S Hoja De Datos

7-5

CH 7/ View Event Data

Energy Platform is able to display statistical trends or plots for the following parameter 

categories:

Standard: Parameters include basic volts and amps, displacement power factor, residual 

and net current, standard demand, energy, and harmonics. These power parameters are 

measured more accurately using a one (1) second interval, summarized by min, max 

and avg at the end of the interval.

Distortion RMS, THD, Frequency: Parameters include voltage and current THD, 

voltage and current TID, crest factor, signed and unsigned harmonic, and transformer 

factor.

Advanced Demand: Parameters include peak power and predicted demand. These 

parameters measure the ratio of maximum demand of the power distribution system to 

the total connected load of the system.

Advanced Energy: Parameters include energy on per phase and total basis as well as in 

forward and reverse mode.

NOTE: See page 6-10 for the detailed list of parameters available for trending. 

The following topics are covered in this section.

Trend Display

7-6

Trend Setup

7-7