Greisinger GDH 200-13 Digital Manometer 601495 Hoja De Datos
Los códigos de productos
601495
H59.0.02.6C-02
Page 1 of 2
Operating Manual Manometer
(Over- /Under- And Difference Pressure)
GDH200-13
Specification
Measuring Range:
0.0 ...199.9 mbar,
resolution 0,1 mbar
200...1999 mbar,
resolution 1 mbar;
0.0 ...199.9 mmHg,
resolution 0,1 mmHg
200...1500 mmHg,
resolution 1 mmHg;
0.00...19.99 PSI,
resolution 0.01 PSI;
Measuring range for underpressure: same as above; just switch connections -> display without neg. sign
non corrosive gases
Because of automatic offset adjustment not suitable for pressures smaller than ±0.4mbar .
Suitable instrument for such measurings: GDH200-07: 0.01mbar or 1Pa resolution! Pressures> 4 Pa
non corrosive gases
Because of automatic offset adjustment not suitable for pressures smaller than ±0.4mbar .
Suitable instrument for such measurings: GDH200-07: 0.01mbar or 1Pa resolution! Pressures> 4 Pa
Max. Overpressure:
2000 mbar
Accuracy: (at nominal temperature = 25°C, ±1 digit, offset adjustment)
200..1999mbar:
±0.2%FS hysteresis and linearity
±0.4 %FS temperature dependency 0 to 50°C
0.0..199.9mbar:
±1%FS hysteresis and linearity
±2%FS temperature dependency 0 to 50°C
Pressure Connections:
2 metal pressure ports for connection to 6 x 1 mm tubes at the top of device (4mm inner tube Ø)
standing out approx. 11mm
„+“ = higher pressure, „-“ = lower pressure
standing out approx. 11mm
„+“ = higher pressure, „-“ = lower pressure
Measuring Frequency:
1 measuring per second (at ‘dyn‘-measuring integrating, for quickly changing pressures)
Display:
approx. 13 mm high, 3½-digit LCD
Operation Elements:
3 keys for ON/OFF, min-/max-value display, zero setting
Min-/Max-Value Memory: Min and max measured value are stored
Zero Function:
The display value is set to zero per keypress, identical to an autom. zero adjustment
Scale:
digital scale correction for pressure measuring
Ambient Conditions:
-25 to 50°C; 0 to 80% RH. (not condensing)
Storage Temperature:
-25 to 70°C
Power Supply:
9V-battery type JEC 6F22 (in scope of supply)
Power Consumption:
approx. 250µA at standard measuring of static pressures, 3mA at ‘dyn‘-measuring
Battery Life:
Standard zinc carbon battery more than 1200 hours at standard measuring!
Battery Change Indicator:
automatically if battery is used up: "BAT"
Auto-Off-Function:
when the Auto Off Function is activated, the device switches automatically off, if keypad is not attended
for a longer time (selectable 1..120min).
for a longer time (selectable 1..120min).
Housing:
impact-resistant ABS, transparent panel, front side IP65
Dimensions:
approx. 106 x 67 x 30 mm (L x W x D) without pressure ports
Weight:
approx. 135g incl. battery
EMC:
The device corresponds to the essential protection ratings established in the Regulations of the Council
for the Approximation of Legislation for the member countries regarding electromagnetic compatibility
(89/336/EWG). Additional fault: <1%
for the Approximation of Legislation for the member countries regarding electromagnetic compatibility
(89/336/EWG). Additional fault: <1%
Safety instructions:
This device has been designed and tested in accordance to the safety regulations for electronic devices.
However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety measures and special safety
advises given in this manual will be adhered to when using it.
1. Trouble-free operation and reliability of the device can only be guaranteed if it is not subjected to any other climatic conditions
However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety measures and special safety
advises given in this manual will be adhered to when using it.
1. Trouble-free operation and reliability of the device can only be guaranteed if it is not subjected to any other climatic conditions
than those stated under “Specification”.
If the device is transported from a cold to a warm environment condensation may result in a failure of the function. In such a case
make sure the device temperature has adjusted to the ambient temperature before trying a new start-up.
If the device is transported from a cold to a warm environment condensation may result in a failure of the function. In such a case
make sure the device temperature has adjusted to the ambient temperature before trying a new start-up.
2. If there is a risk whatsoever involved in running it, the device has to be switched off immediately and to be marked accordingly to
avoid re-starting. Operator safety may be a risk if:
•
there is visible damage to the device
•
the device is not working as specified
•
the device has been stored under unsuitable conditions
In case of doubt, please return device to manufacturer for repair or maintenance.
3. Warning: Do not use these product as safety or emergency stop device, or in any other application where failure of the product
could result in personal injury or material damage.
Failure to comply with these instructions could result in death or serious injury and material damage.
Failure to comply with these instructions could result in death or serious injury and material damage.
4. The battery has to be taken out, when storing device above 50°C.
It is recommended to take the battery out, when storing device for a longer period of time.
GREISINGER
electronic GmbH
D - 93128 Regenstauf, Hans-Sachs-Straße 26 • Phone: 0049 9402/9383-0, Fax: 0049 9402/9383-33, e-mail: info@greisinger.de