Voltcraft LX-1108 Lux-Meter, illumination measuring device, Brightness meter, 0 à 400 000 lx LX-1108 Manual De Usuario
Los códigos de productos
LX-1108
Intended use
The Luxmeter is a digital measuring instrument which can measure
light intensity in Lux units and in Foot-candle (Fc).
A graded filter can be selected for various light sources, in order to
measure the actual strength of light.
Measurements are made via a foto-element with a filter, that sepa-
rates the visible light spectrum in order to be measured. The resul-
ting measurements are shown in an LCD bar display as a value ran-
ging from 0 to 400000 Lux.
The momentary value can be held or the the minimum/maximum
values stored.
A series interface is available. A 9-V block battery (type 1604A) is
required for operation .
light intensity in Lux units and in Foot-candle (Fc).
A graded filter can be selected for various light sources, in order to
measure the actual strength of light.
Measurements are made via a foto-element with a filter, that sepa-
rates the visible light spectrum in order to be measured. The resul-
ting measurements are shown in an LCD bar display as a value ran-
ging from 0 to 400000 Lux.
The momentary value can be held or the the minimum/maximum
values stored.
A series interface is available. A 9-V block battery (type 1604A) is
required for operation .
Measurements must not be carried out under unfavourable ambient
conditions.
conditions.
The following are unfavourable ambient conditions:
- excessive dampness or humidity
- dust or combustible gases, vapours or solvents
- Electrical storms or stormy conditions and strong electrostatic
- excessive dampness or humidity
- dust or combustible gases, vapours or solvents
- Electrical storms or stormy conditions and strong electrostatic
fields, etc
Use other than that described above will lead to damaging the pro-
duct.
No part of the product may be modified or converted!
The safety instructions should be observed without fail!
duct.
No part of the product may be modified or converted!
The safety instructions should be observed without fail!
19