Beha Amprobe LT-10-EURTester 4386345 Hoja De Datos
Los códigos de productos
4386345
The Amprobe LT-10 Lamp Tester is a pocket-sized tool that takes the guesswork
out of troubleshooting fluorescent lighting systems. Quickly determine by process
of elimination, whether it’s the bulb, pins, voltage or ballast. The highly responsive
48” antenna, will save you trips up and down the ladder. The LT-10 Lamp Tester
will go from your pocket to answers in seconds.
out of troubleshooting fluorescent lighting systems. Quickly determine by process
of elimination, whether it’s the bulb, pins, voltage or ballast. The highly responsive
48” antenna, will save you trips up and down the ladder. The LT-10 Lamp Tester
will go from your pocket to answers in seconds.
Troubleshooting Lighting Systems is Easy as 1-2-3:
1. Check if fluorescent light bulb is damaged with LAMP and PIN TEST functions
2. Verify if voltage is present at the ballast with VolTect™ non-contact voltage detection
3. If light bulb passes the test in step 1 and the voltage is present in step 2, but the lamp
2. Verify if voltage is present at the ballast with VolTect™ non-contact voltage detection
3. If light bulb passes the test in step 1 and the voltage is present in step 2, but the lamp
is still not working, then replace ballast.
LT-10
Lamp Tester
www.Amprobe.com
Goes From Your Pocket to Answers in Seconds
LT-10 SPeciFicATionS
Specifications
LT-10
Compatible lamps
T2, T4, T5, T8, T9, T10, T12 and fluorescent energy saving light bulbs
Test voltage
Approximately 3 kV / 280 kHz
Field strength
Approximately 100 μV/m at 260 - 300 kHz
Maximum antenna length
48"
Filament test
T2, T4, T5, T8, T9, T10, T12
VolTect™ non-contact
voltage detection
AC 90 V to AC 600 V, 50/60 Hz
CAT II 300 V, CAT I 600 V
CAT II 300 V, CAT I 600 V
Supplied with
48” antenna, adaptor plate, users manual, battery and carrying case
For more detailed specifications see users manual.
• Determine if fluorescent light bulbs
are operational prior to installation or
removal
• Verify voltage presence without the
need for another tool
• Increase productivity by minimizing
trips up and down a ladder
• All tests performed with easy, single
button operation
• Ultra-compact design for portability
• Industry leading 48” removable, fully
retractable antenna
• Insulated antenna sleeve for safe
testing
• Compatible with fluorescent light bulbs:
- T2, T4, T5, T8, T9, T10, T12 and
fluorescent energy saving light bulbs
fluorescent energy saving light bulbs
For detailed specifications and ordering info go to www.Amprobe.com
4265812 B
©2013 Amprobe. All rights reserved.