Voltcraft TM-500RF Digital Thermometer E0101TR Manual De Usuario

25

You can switch the display language between German and English.

•  Press and hold the button 

“C/F”

 (4) for about 3 seconds.

•  The display switches between German and English.

•  Briefly push the button “C/F” (4) at the base station to switch the temperature unit between °C 

(degrees Celsius) and °F (degrees Fahrenheit). 

•  To switch the remote sensor display between °C and °F, briefly push the button “C/F” (19) in the 

battery compartment of the remote sensor (20).

The setting of the temperature unit for base station and remote sensor is independant.

1.  Press the button 

“

SET

”

 (3) to enter the setting mode. The symbol SET lights up in the LC display 

of the base station and the MAX value starts blinking.

2.  Use the buttons 

“

+

”

 (5) or 

“

-

”

 (6) to set the desired temperature value. The default temperature 

value is -50 °C.

3.  Press afterwards the button 

“

SET

”

 (3) to set the MIN value.

4.  Use the buttons 

“

+

”

 (5) or 

“

-

”

 (6) to set the desired temperature value.

5.  Press the button 

“

SET

”

 (3) to save the values and exit the setting mode.

When the measured temperature of the remote sensor drops below or exceeds the set 

values, the backlight of the base station starts blinking and the buzzer becomes active. 

Press the button 

“

BACKLIGHT/ALERT STOP

”

 (2) to deactivate the alarm. The buzzer is 

deactivated by default.
When the temperature drops below -50 °C or exceeds +120 °C, the LC display shows 

“

Lo

”

 or respectively 

“

Hi

”

.

Press and hold the button 

“

BACKLIGHT/ALERT STOP

”

 (2) for approx. three seconds 

in order to activate/deactivate the buzzer. One single beep means, that the buzzer is 

deactivated. Two beeps mean, that the buzzer is activated.

Briefly push the button “

BACKLIGHT/ALERT STOP

” (2) to activate the backlighting of the LC display 

of the base station for about 5 seconds.