Voltcraft ®Temperature meter, thermometer 309 Hoja De Datos
Los códigos de productos
309
Kalibrier
Kalibrier
Kalibrier
Kalibrier----Zertifikat
Zertifikat
Zertifikat
Zertifikat
Calibration certificate
MUSTER
Testo Industrial Services GmbH
Gewerbestraße 3
79199 Kirchzarten
79199 Kirchzarten
Tel
+49 7661 90901-8000
www.testotis.de
Seite
1/2
Fax
+49 7661 90901-8010
info@testotis.de
Page
Konformitätsaussage
Konformitätsaussage
Konformitätsaussage
Konformitätsaussage
Conformity
X
Messwert(e) innerhalb der zulässigen Abweichung¹.
Measured value(s) within the allowable deviation¹.
Messwert(e) außerhalb der zulässigen Abweichung¹.
Measured value(s) outside of the allowable deviation¹.
---
---
---
---
¹) Die Messunsicherheit wurde nach GUM mit dem Erweiterungsfaktor k=2 berechnet und enthält die Unsicherheit des Verfahrens sowie die Unsicherheit des
Prüflings. Die Konformitätsaussage erfolgte nach DIN EN ISO 14253-1 gemäß der Kalibrieranweisung QSA-TIS 7.5-02.
¹) The measurement uncertainty was calculated according to the regulations of GUM with the coverage factor k=2 and contains the uncertainty of the measuring
procedure and the uncertainty of the measuring system. The statement of conformity was made according to DIN EN ISO 14253-1 according to calibration in-
struction QSA-TIS 7.5-02.
struction QSA-TIS 7.5-02.
Dieser Kalibrierschein darf nur vollständig weiterverbreitet werden. Auszüge oder Änderungen bedürfen der Genehmigung des ausstellenden Kalibrierlaboratori-
ums. Kalibrierscheine ohne Unterschrift und Stempel haben keine Gültigkeit.
ums. Kalibrierscheine ohne Unterschrift und Stempel haben keine Gültigkeit.
This calibration certificate may not be reproduced other than in full except with the permission of the issuing laboratory. Calibration certificates without signature
and seal are not valid.
and seal are not valid.
Stempel
Seal
Fachverantwortlicher
Supervisor
Bearbeiter
Technician
Falko Harich
Kerstin Kovacs
Gegenstand
Object
Temperatur-Messgerät
testo 925
testo 925
Tauch-/Einstechfühler was-
serdicht
serdicht
Hersteller
Manufacturer
Testo AG
Testo AG
Typ
Type description
0560 9250
0602 1293
Serien Nr.
Serial no.
12345678
12345678
Inventar Nr.
Inventory no.
---
---
Prüfmittel Nr.
Test equipment no.
---
---
Equipment Nr.
Equipment no.
12345678
12345678
Standort
Location
---
---
Auftraggeber
Customer
Max Mustermann GmbH
DE-12345 Musterstadt
DE-12345 Musterstadt
Kunden Nr.
Customer ID no.
1234567
Auftrags Nr.
Order no.
1234567 / 0520 0001
Datum der Kalibrierung
Date of calibration
04.04.2014
Datum der empfohlenen Rekalibrierung
Date of the recommended re-calibration
04.04.2015
Hiermit bestätigen wir, dass das durchfüh-
rende Kalibrierlabor ein Managementsystem
nach ISO 9001:2008
rende Kalibrierlabor ein Managementsystem
nach ISO 9001:2008
ISO 9001:2008
ISO 9001:2008
ISO 9001:2008, sowie ISO/IEC
ISO/IEC
ISO/IEC
ISO/IEC
17025:2005
17025:2005
17025:2005
17025:2005 eingeführt hat. Die Urkunden
finden Sie auf
finden Sie auf
www.testotis.de
. Die für die
Kalibrierung verwendeten Messeinrichtun-
gen werden regelmäßig kalibriert und sind
rückführbar auf die nationalen Normale der
Physikalisch Technischen Bundesanstalt
(PTB) Deutschlands oder auf andere natio-
nale Normale. Wo keine nationalen Normale
existieren, entspricht das Messverfahren
den derzeit gültigen technischen Regeln
und Normen. Die für diesen Vorgang ange-
fertigte Dokumentation kann eingesehen
werden. Alle erforderlichen Messdaten sind
in diesem Kalibrier-Zertifikat aufgelistet.
gen werden regelmäßig kalibriert und sind
rückführbar auf die nationalen Normale der
Physikalisch Technischen Bundesanstalt
(PTB) Deutschlands oder auf andere natio-
nale Normale. Wo keine nationalen Normale
existieren, entspricht das Messverfahren
den derzeit gültigen technischen Regeln
und Normen. Die für diesen Vorgang ange-
fertigte Dokumentation kann eingesehen
werden. Alle erforderlichen Messdaten sind
in diesem Kalibrier-Zertifikat aufgelistet.
Hereby we confirm that the performing
calibration laboratory is working with a
management system according to ISO
ISO
ISO
ISO
9001:2008
9001:2008
9001:2008
9001:2008 and ISO/IEC 17025:2005
ISO/IEC 17025:2005
ISO/IEC 17025:2005
ISO/IEC 17025:2005. Ac-
creditation certificates can be found under
www.testotis.de
. The measuring installati-
ons used for calibration are regularly
calibrated and traceable to the national
standards of the German Federal Physical
Technical Institute (PTB) or other national
standards. Should no national standards
exist, the measuring procedure corresponds
with the technical regulations and norms
valid at the time of the measurement. The
documents established for this procedure
are available for viewing. All the necessary
measured data can be found on this calibra-
tion certificate.
calibrated and traceable to the national
standards of the German Federal Physical
Technical Institute (PTB) or other national
standards. Should no national standards
exist, the measuring procedure corresponds
with the technical regulations and norms
valid at the time of the measurement. The
documents established for this procedure
are available for viewing. All the necessary
measured data can be found on this calibra-
tion certificate.