Cisco Packet over SONET OC3 2 PACK Bundle PA-POS-1OC3-2PAK= Hoja De Datos
Los códigos de productos
PA-POS-1OC3-2PAK=
Data Sheet
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 4
The Cisco 1-Port OC-3/STM-1 POS Port Adapter supports one port of any of the following SFP
optics: MM, IR1, and LR1. The "Product Ordering" section of this document provides product part
numbers for the SFPs used with the Cisco 1-Port OC-3/STM-1 POS Port Adapter.
Product Specifications
Chassis and Processors
The Cisco 1-Port OC-3/STM-1 POS Port Adapter is supported on the platforms and processors
listed in Table 2.
Table 2.
Chassis and Processor Compatibility
Chassis
Processors
Cisco 7204VXR, 7206VXR, 7301
NPE-G2, NPE-G1, NPE-400
Cisco 7304
NSE-100 and NPE-G100
Cisco 7600
FlexWan and Enhanced FlexWan
Port Adapters
The Cisco 1-Port OC-3/STM-1 POS Port Adapter interoperates with all OC-3 POS port adapters
with the Cisco 7200VXR, 7301, 7304, and 7600 Series routers.
Software
The Cisco 1-Port OC-3/STM-1 POS Port Adapter is supported in Cisco IOS
®
Software Release
12.3(10), 12.0S, 12.2S, 12.2SX, 12.2(28)SB, 12.4XD and later. The Cisco 7304 supports this PA in
12.2(31)SB and above. Consult your Cisco representative for more details.
Key Features
The primary features of the Cisco 1-Port OC-3/STM-1 POS Port Adapter are described in this
section.
Hardware and Software Features
●
Single-wide port adapter form factor
●
One concatenated OC-3/STM-1 port
●
Line-rate performance
●
Online insertion and removal (OIR)
●
Modular optics supporting single-mode (intermediate reach and long reach) and multimode
Product Specifications
Physical
●
Weight: Approximately 14 ounces
●
Dimensions (H x W x D): Approximately 1 x 6 5/8 x 5 inches (body only)
●
Approximately 1 x 6 5/8 x 7 inches (overall)