Soundmaster UR 145 UR-145 Manual De Usuario
Los códigos de productos
UR-145
ENGLISH
2. How to used
•
As the unit is powered up, the date and clock are defaulted to Saturday, 1
st
Jan 2011, 0:00 or
12:00AM
•
The two alarms are defaulted to 0:00 or 12:00AM, daily type but disabled
•
The radio is switched off
•
It then switches to auto-run mode
•
When unit is powered up first time, RCC will be active automatically and volume grade icon
flashing on LCD, When the signal has been received and decoded successfully ,the real time
clock is updated and volume grade icon solid, press other key to start its corresponding
function.
clock is updated and volume grade icon solid, press other key to start its corresponding
function.
2.1 Auto-run Mode (Radio OFF)
•
Press <Mode> once to set up different mode sequentially
Auto-run Mode (Display showed Clock )
Set the Clock
Set the Date
Dimmer Select(Hi/Lo)
Set SDA
Clock Format Selection (12/24 Hour)
•
Press <Alarm-1> to review/set the alarm-1
•
Press <Alarm-2> to review/set the alarm-2
•
Only when the radio is ON, press <Preset +>, or < Preset -> to recall the preset memories.
•
Only when the radio is ON, press <Memory>, < Preset +> or <Preset -> and then <Memory >
again to store the current station into memory.
again to store the current station into memory.
•
Only when the radio is ON, press <Vol. +> and <Vol. -> to adjust speaker volume
•
At every minute boundary, the real time clock is compared with the alarm setting if it has been
enabled. For details, please refer to the section of ‘When alarm is active’
enabled. For details, please refer to the section of ‘When alarm is active’
Note: The device will active RCC for synchronization in background for time
update at the 1:01& 3:01& 5:01 everyday
update at the 1:01& 3:01& 5:01 everyday
2.2 Set the clock
•
Press <Mode> once when the unit stays in clock display mode
•
The clock goes flashing the LCD
•
The second keeps counting up once per second
GB 2