Fujitsu FTR-B3 CA 12V PCB Mount Relay 12Vdc FTR-B3 CA 12V Hoja De Datos

Los códigos de productos
FTR-B3 CA 12V
Descargar
Página de 10
9
FTR-K1 SERIES
1. General Information
l
 
All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC including 
       amendments.
l
 
Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005. 
  (Amendment to Directive 2002/95/EC)
l
 
All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes 
 
at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf
l
 
Lead free solder plating on relay terminals is Sn-3.0Cu-Ni for FTR-B3 and FTR-B4 series relays.
  This material has been verified to be compatible with PbSn assembly process.
2. Recommended Lead Free Solder Profile
l
   
Recommended solder Sn-3.0Ag-0.5Cu or Sn-3.0 Cu-Ni (only FTR-B3 and FTR-B4)
RoHS Compliance and Lead Free Information
3. Moisture Sensitivity
l
    
Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.
4. Tin Whiskers
l
    
Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length 
 
whisker was found by our in house test.
FTR-B3 SERIES
Flow Solder condition:
Pre-heating: 
maximum 120˚C
Soldering: 
dip within 5 sec. at  
 
 
260˚C solder bath
Solder by Soldering Iron:
Soldering Iron 
Temperature: 
maximum 360˚C
Duration: 
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions