Crydom SOLID-STATE-RELAY DRTC24A06 DRTC24A06 Hoja De Datos
Los códigos de productos
DRTC24A06
DataSheet
Solid State Relay Timer
SeriesOneDR Timer
•
6 Amp AC and DC rated output
•
Compact size (11mm wide)
•
Dual SCR or MOSFET output
•
AC/DC control
•
Zero-crossing (resistive loads) or random-fire (inductive loads) AC output
•
Timer status LED indicator
•
UL listed, HP rated
•
8 Industry standard fuctions (A/At, B, C, D/Di, H/Ht, L/Li, Ac and Bw)
PRODUCT SELECTION
Control Voltage
DC Output
AC Output
12-24 VAC/DC
DRTx24D06x
DRTx06D06
90-140 VAC/DC
DRTx24B06x
180-280 VAC/DC
DRTx24A06x
AVAILABLE OPTIONS
DRT
Series
Operating Voltage
06: 60 VDC
24: 280 VAC
Rated Load Current
06: 6 Amps
Control Voltage
D: 12-24 VAC/DC
A: 180-240 VAC/DC
B: 90-140 VAC/DC
Timing Function
A: A/At, Delay on Make
B: Single Shot
C: Delay on Break
H: H/Ht, Interval
L: L/Li, Repeat Cycle
U: Multifunction
(A/At, H/Ht, D/Di,
B, C, Ac & Bw)
Switching Type
(24 suffix only)
Blank: Zero Voltage Turn-On
R: Random Turn-On
06
24
D
A
R
AC
Output
Only
Required for valid part number
For options only and not required for valid part number
For options only and not required for valid part number
OUTPUT SPECIFICATIONS
(1)
DRTx06
DRTx24
Description
Operating Voltage
24-280 VAC (47-440Hz)
1-48 VDC
Transient Overvoltage [Vpk]
600
60 VDC
Rated Load Current
(2)
6 Arms
6 A
Rated Load Current {UL508 Motor Controller}
(2)
[Arms]
3.6 Arms
-
Minimum Load Current
150 mArms
2.5 mA
Maximum Off-State Leakage Current @ Rated Voltage
0.1 mArms
0.25 mA
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec]
(3)
500
-
Maximum Surge Current (AC output 1 cycle. DC output 10ms)
285/300 Apk (50/60Hz)
60 A
Maximum I²t for Fusing [A² sec]
410/375 (50/60Hz)
-
Maximum On-State Voltage Drop @ Rated Current [Vpk]
1.3
0.3 VDC
Maximum On-State Resistance (RDS-ON) [Ohms]
-
0.034
HP rating UL 508/IEC60947[HP (KW)]: 240 VAC
1/3 (0.24)
-
IEC 62314 LC-A [FLA]
6 A
-
IEC 62314 LC-B [Kw]
0.24
-
Wire Size min/max (solid/stranded) [AWG/ IEC mm²]
(4)
22/12 [0.33/3.31]
22/12 [0.33/3.31]
Output Terminal Screw Torque [in lb (Nm)]
7.0 (0.8)
7.0 (0.8)
Do not forget to visit us at:
www.crydom.com
Copyright © 2013 Crydom Inc. Specifications subject to change without notice.
Not all part number combinations are available.
Contact Crydom Technical Support for information on
the availability of a specific part number.
*