Mediola FS20 Wireless master slave transmitter 1-channel Max. range (open field) 100 m 1057-97 Hoja De Datos

\

Timer function, then power-on command; but only, if the master
is still active
This command means that when the ‘FS20 FMS’ is triggered, first the
programmed timer duration expires. Only if the master device is still
active is a power-on command sent to the slave device.



If this operating mode is selected for the ‘negative flank mode’,
then it is meant that the master device is not yet active again.

f

LED blinks in intervals, 1x each, briefly press the control button 4x,
LED blinks in intervals, 5x each

f

Press and hold the control button for 2 seconds, the LED goes out,
then release the control button; the ‘FS20 FMS’ is now in ‘timer
mode’.



Set the desired timer duration (point ‘4. Setting the timer
duration’ on the next page, also see the flowchart).

]

This command means that when the ‘FS20 FMS’ is triggered, the slave
device is turned on immediately. After the programmed timer duration
has elapsed, a power-off command is sent to the slave device.

f

LED blinks in intervals, 1x each, briefly press the control button 5x,
LED blinks in intervals, 6x each

f

Press and hold the control button for 2 seconds, the LED goes out,
then release the control button; the ‘FS20 FMS’ is now in ‘timer
mode’.



Set the desired timer duration according to point 4 (see also
the flowchart).