C&E Profi Funk-Farb-Wetterstation Wireless Weather Station W237-8+W266G8 9129c19 Hoja De Datos

•  Push the button „SELECT/Zz“ (1) several times briefly until the right edge of the display shows an arrow „ “ next to

the wind speed display.

•  Briefly push the button „MODE/SET“ (2) to switch at any time between:
 „GUST“

Gust speed: Display of the maximum wind speed of the last 10 hours

 „AVERAGE“

Average wind speed: Average value of the wind speeds of the last 2 minutes

•  To the left of the wind speed display, a compass rose shows the wind direction.
•  The arrow indicates the average wind direction of the last 2 minutes.

•  Push the button „SELECT/Zz“ (1) several times briefly until the right edge of the display shows an arrow „ “ next to

rain volume display.

•  Briefly push the button „MODE/SET“ (2) to switch at any time between:
 „DAILY“

rain volume of the last 24 hours

 „WEEKLY“

Rain volume of the last 7 days

 „MONTHLY“

Rain volume of the last month

 „TOTAL“

Total rain volume since recording started

  At the same time, the lower left of the display shows a graphic display of the rain volume curve of the last 6 hours.

 If the total rain volume („TOTAL“) is displayed, it can be reset to „0.00“ by pushing the button „MEM/-“ for 3

seconds.

•  First select the desired sensor; see chapter 11. d).
•  Briefly press the button „MEM/-“ (4) repeatedly to switch between the following values:
 -  Maximum values („MAX“ in the display)
 -  Minimum values („MIN“ in the display)
  -  Current measured values
•  To reset the maximum and minimum values, first have the maximum or minimum values displayed as described

above with the button „MEM/-“ (4) (the display shows „MAX“ or „MIN“).

 Now keep the button „MEM/-“ (4) pushed for about 3 seconds. All saved values will be reset.